Skip to content Skip to navigation menu

Sartobind® S Pico 0.08 mL

Sartobind® S membrane adsorber units combine the advantages of convective media and ion exchange chromatography for rapid and easy contaminant removal or capture of virus and virus like particles.

Item no.:  92IEXS42DD-11--D

 

* 72 Hours Turnaround Time

Sartobind® S membrane adsorbers display a macro-porous structure with pore size of > 3 µm. Sulfonic acid ligands are bound covalently to the complete internal surface of the membrane, resulting in separation media of high binding capacity combined with exceptional high flow rates.

Applications:

The S membrane adsorber is successfully used in FDA-approved drug manufacture to remove host cell proteins at high flow rates. As a cation exchanger it displays not only aggregate removal capabilities but typically at least ten-fold higher binding capacity for viruses and virus-like-particles (VLP).

Benefits:

The Sartobind S adsorber speeds up the production process by high flow rate and opens new opportunities for the purification of therapeutic proteins and vaccines.

  • High speed host cell protein removal up to 30 bed volumes/ min
  • Aggregate removal

Easy to use:

  • Plug and play devices from 0.08 ml to 5 l
  • Can be used like a filter
  • Flow rate up to 30 bed volumes/min
  • Disposable or re-usable

Connections (Physical)

  • Connectors
    Luer female connectors

Dimensions

  • Bed Height
    4 mm
  • Dimensions WxDxH
    31 × 11 cm
  • Membrane Area
    2.9 cm²

Materials of Construction

  • Housing Material
    Polypropylene (PP)
  • Materials of Construction
    Polypropylene, polyester

Operating Conditions

  • Maximum Operating Pressure
    0.6 MPa
  • Maximum Venting Pressure
    0.5 bar, 0.05 MPa, 7 psi
  • Recommended Flow Rate
    0.8 – 2.4 mL/min
  • pH Stability
    pH 3 – 14 (short term)

Physicochemical Information

  • Bed Volume
    0.08 mL
  • Ligand
    Sulfonic acid
  • Ligand Density
    2 – 5 µeq/cm²
  • Pore Size
    3 – 5 µm
  • Thermal Stability
    Sartobind capsules with ion exchange membranes can be autoclaved at 121 °C for 30 min. We recommend one autoclaving cycle only.
  • Typical Dynamic Binding Capacity 10% per unit
    2.0 mg
  • Void Volume
    0.4 mL

Product Information

  • Pack Size
    10
  • Type
    Membrane adsorber
  • What you receive
    • 10 units
    • 2 adapters Luer male to UNF 10-32 female
    • 1 operating instruction
    • 1 certificate
Sartobind® Adapter UNF 10-32 female to Luer male

Adapter UNF 10-32 female to Luer male for Sartobind®Material: natural PEEK