Skip to content Skip to navigation menu

Microsart e.jet Fluid Pump 4L/min

Maintenance-friendly and performant pumps for smooth and reliable filtration. A complete product range for one to 6-branch filtration systems. Sartorius pumps use state of the art technology making robustness one of their best features. Whether you would like to use a vacuum flask or prefer a flask-free solution (Microsart® e.jet), Sartorius pumps will answer all your needs and help you save space without compromising on performance.

Item no.:  166MP-4

Price:  $1,610.00

1 Piece

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet Transfer Pump is ideal for sample filtration in Microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Constant flow rates and a defined maximum vacuum guarantee smooth and reliable filtration. The Microsart® e.jet Transfer Pump greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. The Microsart® e.jet is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

The vacuum pump series Microsart® maxi.vac and Microsart® mini.vac provide up to date technology for daily use in the Microbiology laboratory environment. They are electric neoprene membrane pumps and therefore oil- and maintenance-free with a low noise level. The vacuum produced by these pumps is controlled and can be easily adjusted to your specifications. Thus sensitive cells (e.g. bacteria) are concentrated on the surface of a membrane filter under better conditions, which results in decreased mortality of the cells, higher recovery rates and shorter incubation times.


zh 5.1 MB
zh 1.7 MB


Microsart® e.jet — Laboratory Transfer Pump with Quick Connection for Microbiological Analysis
en 100.6 kB


  • Market
    • Food & Beverage
    • Environmental/Water Testing
    • Pharma/Biotech

General Specifications

  • Additional Product Specifications
    Max. temperature of liquid media: 5 – 80 °C
  • Flow Rate
    > 4.0 Nl/min
  • Maximum Viscosity
    < 150 cSt
  • Pump Flow
    4.0 l/min

Operating Conditions

  • Maximum Vacuum
    400 mbar
  • Operating Pressure
    1 bar

Power Requirements

  • Input Wattage
    no information available
  • Line Frequency
    50 – 60 Hz
  • Line Voltage
    100 – 240 V
  • Power Requirements
    47 - 63 Hz

Product Information

  • Type of Pump
    Liquid Transfer Pump
Tubing pressure-sided, silicone, 1 m

Transparent silicone tubing (1 m).

Tubing with Coupling Quick Con., PSU


Transparent silicone tubing (20 cm) with pre-assembled Quick Connection Coupling.

Rubber feet (4x)
Rubber feet (4x)
Item no.: SB-12-01-0274

Power connection 3-pol.
Power connection 3-pol.
Item no.: SB-12-01-0273

Item no.: SB-12-01-0272

Protecting cap (mains switch)
Protecting cap (mains switch)
Item no.: SB-12-01-0271