Skip to content Skip to navigation menu

Glass Vacuum Filtration Device, 47/50 mm

This glass vacuum filtration holder has been designed for particle testing, clarification and sterile filtration with the use of 47 or 50 mm filters.

Item no.:  16316

Price:  $445.00

1 Piece
 

The device is delivered with a PTFE-coated screen filter support that has the benefit to be easy to clean. Therefore it is recommended when the filtrate is required or when liquids difficult to remove from glass supports must be examined.

Catalog

Laboratory Filtration Products
en 17.2 MB

User Manual

16306,16307, 16315,16316 Glass Vacuum Filter Holders
en 345.2 kB

Applications

  • Application Area
    • Sterile Filtration
    • Analytical Sample Preparation
    • Clarification
    • Particle Analysis

Connections (Physical)

  • Connectors
    15 mm outside diameter

Dimensions

  • Filter Diameter
    ⌀ 47 mm / 50 mm
  • Filtration Area
    12.5 cm²

Materials of Construction

  • Materials of Construction
    Glass with PTFE-coated screen filter support

Product Information

  • Filter Holder Type
    Glass Vacuum Filter Holders
  • Pack Size
    1

Usage Protocols

  • Sterilization Procedures
    • By autoclaving (max. 134 °C)
    • By dry heat (max. 180 °C)
    • By flaming
    • By other methods acc. to ISO 8199

Volumes

  • Funnel Volume
    250 mL
Polyethersulfone Membrane Filters - Type 15406- 0.45 µm pore size- 50 mm diameter- 100 pieces per pack

$195.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11303, 1.2 µm pore size, 47 mm diameter, 100 pieces per pack

$199.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11302, 3.0 µm pore size,47 mmd diameter, 100 pieces per pack

$156.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyamide Membrane Filters / Type 25006

$141.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Hydrophobic PTFE Membrane Filters / Type 11806

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11807

$450.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Cellulose Acetate Membrane Filters / Type 12303

$415.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Hydrophobic PTFE Membrane Filters / Type 11803

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Regenerated Cellulose Membrane Filters / Type 18406, 0.45 µm pore size, 50 mm diameter, 100 pieces per pack

$345.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11306,0.45 µm pore size,  50 mm diameter, 100 pieces per pack

$143.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Acetate Membrane Filters / Type 12342

$215.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11304, 0.8 µm pore size, 50 mm diamter, 100 pieces per pack

$174.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyethersulfone Membrane Filters - Type 15407- 0.2 µm pore size- 47 mm diameter- 100 pieces per pack

$205.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11342, 5.0 µm pore size, 47 mm diameter, 100 pieces per pack

$205.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 47 mm Discs

$185.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of 5.0E+08 cm². Pack of 100 white 47 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Cellulose Acetate Membrane Filters / Type 11104

$128.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11302, 3.0 µm pore size,50 mm diameter, 100 pieces per pack

$170.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyamide Membrane Filters / Type 25007

$155.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Regenerated Cellulose Membrane Filters / Type 18406, 0.45 µm pore size, 47  mm diameter, 100 pieces per pack

$199.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11342, 5.0 µm pore size,  50 mm diameter, 100 pieces per pack

$215.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11304,0.8 µm pore size,   47 mm diameter, 100 pieces per pack

$174.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11303, 1.2 µm pore size, 50 mm diameter, 100 pieces per pack

$170.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyethersulfone Membrane Filters - Type 154078- 0.1 µm pore size- 47 mm diameter- 100 pieces per pack

$205.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Hydrophobic PTFE Membrane Filters / Type 11842

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Cellulose Acetate Membrane Filters / Type 11105

$80.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11301, 8.0 µm pore size, 50 mm diameter, 100 pieces per pack

$170.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11305,  0.65 µm pore size, 47 mm diamter, 100 pieces per pack

$175.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyamide Membrane Filters / Type 25006

$188.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11301, 8.0 µm pore size, 47 mm diameter, 100 pieces per pack

$200.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Regenerated Cellulose Membrane Filters / Type 18407, 0.2 µm pore size, 47 mm diameter, 100 pieces per pack

$199.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Cellulose Acetate Membrane Filters / Type 11105

$80.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Polyethersulfone Membrane Filters - Type 15406- 0.45 µm pore size- 47 mm diameter- 100 pieces per pack

$205.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Hydrophobic PTFE Membrane Filters / Type 11807

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11806

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11842

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Polyethersulfone Membrane Filters - Type 154078- 0.1 µm pore size- 50 mm diameter- 100 pieces per pack

$205.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11327, 0.2 µm pore size, 47 mm diameter, 100 pieces per pack

$194.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation. Cellulose nitrate filters, pore size 0.2 µm can be used for the analysis of filterability of beer (membrane filter test according to Esser, in “MEBAK – Brautechnische Analysemethoden – Würze, Bier, Mischgetränke – Methodensammlung der Mitteleuropäischen Brautechnischen Analysenkommission“ 2012, Chapter 2.20.1).

Polyamide Membrane Filters / Type 25007

$174.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Cellulose Acetate Membrane Filters / Type 11104

$114.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Acetate Membrane Filters / Type 11107

$123.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Polyethersulfone Membrane Filters - Type 15407- 0.2 µm pore size- 50 mm diameter- 100 pieces per pack

$205.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 50 mm Discs

$184.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of  5.0E+08 cm2. Pack of 100 white 50 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Cellulose Acetate Membrane Filters / Type 12303

$285.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11305,  0.65 µm pore size, 50 mm diameter, 100 pieces per pack

$143.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Acetate Membrane Filters / Type 11107

$123.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Polycarbonate Track-Etched Membrane Filters / 0.4 µm / 47 mm Discs

$187.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.4 µm with a pore density of  1.50E+08 cm2. Pack of 100 white 47 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Hydrophobic PTFE Membrane Filters / Type 11803

$465.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Regenerated Cellulose Membrane Filters / Type 18407, 0.2 µm pore size, 50 mm diameter, 100 pieces per pack

$199.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11306, 0.45 µm pore size, 100 pieces per pack

$143.00

Sartorius Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters are versatile membrane filters that can be used for various lab applications.

Top Features of Cellulose Nitrate Membrane Filters

  • Ideal for many general laboratory applications
  • High non-specific absorption
  • Hydrophilic, with high flow rates
  • Available in a range of pore sizes

Popular Applications for Cellulose Nitrate Membrane Filters

  • Particle Retention
  • Cell Capture
  • Cell Retention
  • Clear filtration

Cellulose Acetate Membrane Filters Type 11106, Pack Size 100 pcs

$121.00

Our hydrophilic cellulose acetate membrane filters are excellently suited for various filter holders.

Top Features of Cellulose Acetate Membrane Filters

  • High flow rates
  • Good chemical resistance (pH 4 – 8)
  • Low adsorption characteristics
  • Suited for use with various filter holders

Popular applications for Cellulose Acetate Membrane Filters

  • Sterile Filtration
  • Buffer filtration
  • Media and sera filtration

Cellulose Acetate Membrane Filters Type 11106, Pack Size 100 pcs

$70.00

Our hydrophilic cellulose acetate membrane filters are excellently suited for various filter holders.

Top Features of Cellulose Acetate Membrane Filters

  • High flow rates
  • Good chemical resistance (pH 4 – 8)
  • Low adsorption characteristics
  • Suited for use with various filter holders

Popular applications for Cellulose Acetate Membrane Filters

  • Sterile Filtration
  • Buffer filtration
  • Media and sera filtration

Customers Also Purchased

Surface Protection Papers

Surface Protection Papers

See more products