All members of the Sartoguard family utilize a highly asymmetric polyether sulfone (PES) membrane double layer for unmatched protection of final filters and bioburden reduction with an LRV of 6 per cm². In addition, combinations with different depth filter materials and gamma sterilizable versions are available.
Order Number: 5465307G8G-FF--A
Availability: On Request
- Protection of downstream equipment and final membrane filters
- Bioburden reduction
- More economical process flow
- Downsizing of filtration systems
- Significantly higher total throughput performance
- LRV of 6 per cm² filtration area for Brevundimonas Diminuta and for Serratia Marcescens
Pure PES membrane
For all, basic membrane prefiltration steps to protect your final membrane filter and downstream equipment. The single-use variants are also available as gamma sterilizable versions.
Power of glass fleece
The Sartoguard GF filter elements combining the defined retention performance of membrane filters with high adsorptive power of glass fiber fleeces.
Unique PES Nanofleece
The Sartoguard NF is the only gamma sterilizable membrane depth filter combination in single-use applications utilizing unique PES Nanofleece technology. The Nanofleece protects the membrane double layer from early blockage due to a high particle load.
For highest process flexibility all Sartoguard® filters are available as for conventional stainless steel or single use applications. All filter elements are available in various sizes and adapter combinations.
Connector Outlet¾" Tri-Clamp 25 mm
Connector Inlet¾" Tri-Clamp 25 mm
Material o-ring | sealSilicone (SI)
Pore size pre-filter0.8 µm
Pore size final-filter0.2 µm
Outer diameter108.5 mm (77 mm without Connection / Valves)
Filter Sizesize 8 (0.13 m² / 1.4 ft²)
Sterilization MethodAutoclavable & Gamma Irradiatable
GMP ComplianceThis product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
Maximum Differential Pressure5 bar
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Housing materialPolypropylene (PP)
Support FleecePolyester (PET)
Sterilization ProceduresAutoclaving=== at 134°C, 30 min, 2 bar` Gamma Irradiation=== with 50 kGy
Bacterial Endotoxins< 0.25 EU/mL as determined by the LAL test
ApplicationmAB Production` Protection of Final Filters