Skip to content Skip to navigation menu

Sartobind® D 75

Sartobind IEX membrane adsorber units combine the advantages of using Sartobind Membrane Adsorbers for ion exchange chromatography and syringe filter design for rapid and easy handling of samples.

Item no.:  93IEXD42DB-12--V

Sartobind® membrane adsorbers (MA) for ion exchange chromatography are ready-to-use syringe filter type units. They all are based on the patented Sartobind® membrane that displays a microporous structure with pore size of > 3 µm. Ligands for ion exchange are bound covalently to the complete internal surface of the membrane, resulting in separation media of high binding capacity combined with very high flow rates. Binding of ion exchange ligands is very stable and allows many cycles of re-use without loss of binding capacity. Sartobind® MA units for ion exchange are available as strong or weak anion (Q and D) and strong cation (S) type and in three sizes between 15 cm2 and 100 cm2 membrane area, corresponding to static binding capacities between 12 mg and 80 mg protein per unit. Sartobind® MA units are equipped with standard Luer Lock connectors and can be run with HPLC or FPLC systems or even by hand with a syringe. The units with polysulfone housings are compatible with many solvents applied in chromatography and can be re-used > 100 times.

  • Ready-to-use devices
  • Simple handling with syringe or pump
  • High binding capacity for larger molecules
  • High flow rate
  • Robust separations
Sartobind D 75, 4 mm bed height,

2 ready-to-use-units

2.1 ml bed volume, 75 cm² membrane area

15 membrane layers, for laboratory use

Membrane: reinforced stabilized cellulose >3 µm pore size

Ligand: diethylamine (weak basic anionexchanger)

Housing material: polysulfone,

Connectors: male and female Luer


Sartobind® Membrane Adsorbers — Chromatography as easy as filtration
en 3.7 MB

Biological Information

  • Reference Protein
    Bovine serum albumin


  • Bed Height
    4 mm
  • Filter Diameter
    ⌀ 25 mm
  • Membrane Area
    75 cm²


  • Reusable

Materials of Construction

  • Housing Material
    Polysulfone (PSU)
  • Membrane Material
    Stabilised reinforced cellulose
  • Reinforcement Material

Operating Conditions

  • Maximum Operating Pressure
    0.6 MPa

Physicochemical Information

  • Chemical Compatibility
    Stable in common chromatography buffers, unstable to peroxide and other oxidizing or reactive reagents
  • Ligand Density
    4 – 6 µeq/cm²
  • Pore Size
    3 - 5 µm
  • Typical Dynamic Binding Capacity 10% per unit
    60 mg

Product Information

  • Membrane Type
    Weak anion exchanger
  • Pack Size
  • What you receive
    • 2 units
    • 1 operating and instruction sheet


  • Flow Rate
    27 mL/min at 1 bar (14.5 psi)
  • Ligand
  • Recommended Flow Rate
    Any flowrate achievable with your chromatography system


  • Bed Volume
    2.1 mL
  • Void Volume
    1.3 mL