Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 1.0 µm, Non-Sterile, Hose Barb 5.5–9 mm Stepped, Hose Barb 5.5–9 mm Stepped, Pack Size 500
Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659B with a pore size of 1 µm can be used as particle and aerosol barrier. It has a hose barb inlet and outlet. Version HYQ is a non-sterile bulk pack. Units can be sterilized by EO .
Item no.: 1659B--------HYQ
Availability (ex works): On Request
Choose your Minisart® with Acrylic-based MBS Housing
Non-sterile Minisart® HY syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows filtration or venting under non-sterile conditions. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. Housing and membrane are tightly connected which allows bidirectional use.
- Bulk packs for less waste
- PVC-free
- Glueable, e.g. to tubing
- Bidirectional use possible
- Very low non-specific binding
Brochure
Catalog
User Manual
-
Bubble PointMin. value with ethanol 0.5 bar (7 psi)
-
Burst PressureMin. value 7.0 bar (102 psi)
-
Connector InletHose Barb 5.5–9 mm Stepped
-
Connector OutletHose Barb 5.5–9 mm Stepped
-
Delivery ConditionNon-Sterile
-
Filtration Area5.3 cm²
-
Flow Rate4000 mL/min with air at 0.1 bar (1.5 psi)
-
High FlowNo
-
Hold-up Volume100 – 150 µL before bubble point
-
Housing Dimensions33 × 41 mm
-
Housing MaterialAcrylic-based multipolymer compound (MBS)
-
Maximum Allowable Back Pressure4.0 bar (58 psi) at 20°C
-
Maximum Allowable Working Temperature60 °C (140 °F)
-
Maximum Inlet Pressure4.0 bar (58 psi)
-
Maximum Operating Pressure4.5 bar (65 psi)
-
Membrane MaterialPolytetrafluorethylene (PTFE)
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Operating Pressure4.5 bar (65 psi)
-
Pore Size1.0 µm
-
Sample Type
-
Air/Gas
- Oils and alkanes according to chemical compatibility
-
Air/Gas
-
Sterilization MethodEthylene oxide
-
Total Throughputup to 100 mL
-
WettabilityHydrophobic
-
pH Range3.0 – 12.0
-
Application AreaVenting / Moisture Barrier
-
Filter Diameter⌀ 26 mm
-
Filter Paper/Membrane ColorClear
-
ApplicationBuffer & Media
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
CytotoxicityAccording to ISO 10993-5
-
Pack Size500
-
PackagingBulk pouch packed