Skip to content Skip to navigation menu

Sartoclean® GF Mini Cartridge 0.8µm

Sartoclean® family is a cellulose acetate (CA) membrane based prefilter. These filters are optimized for the protection of downstream equipment and Sartobran® cellulose acetate final filters.

Item no.:  5601504E9------B

Availability (ex works):  On Request

   

Applications:

  • Vaccines and Blood & Plasma
  • Protection of downstream equipment and CA final membrane filters
  • Bioburden reduction

Benefits:

  • Highest product yields
  • Ultra-low unspecific binding membrane
  • More economical process flow
  • Increased total throughput performance

Pure CA Membrane
Sartoclean® CA

Two variants are available. Either a heterogeneous double layer for highest protection and total throughput performance (3.0 µm|0.8 µm or 0.8 µm|0.65 µm combination) or single layer (0.45 µm or 0.2 µm) membrane constellation for highest flow rates.

Power of glass fleece
Sartoclean® GF

The heterogeneous double layer (3.0 µm|0.8 µm or 0.8 µm|0.65 µm combination) is protected by a layer of glass fleece. This increased the total throughput performance of the membrane double layer and adds an adsorptive component to your filtration process.

For highest process flexibility all Sartoclean® filters are available for conventional or single use applications. All filter elements are available in various sizes and adapter combinations. Review the selection guide in our supporting resources literature.

Datasheet

Sartoclean® GF — Adsorptive Membrane Filter for Colloid and Bioburden Reduction
en 634.9 kB

 

  • Capsule/Cartridge Format
    Mini Cartridges
  • Connector Inlet
    Bayonet Adapter with O-ring (15)
  • Connector Outlet
    N/A
  • Filter Size
    size 9 (0.16 m² / 1.7 ft²)
  • Filtration Area
    0.16 m² / 1.7 ft²
  • Housing Material
    Polypropylene (PP)
  • Industry
    Pharma / Biotech
  • Material Prefilters
    N/A
  • Material o-ring | seal
    Silicone (SI)
  • Maximum Allowable Back Pressure
    2 bar (29 psi) at 20°C
  • Maximum Differential Pressure
    5 bar
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Outer Diameter
    56 mm
  • Pore Size Final-filter
    0.8 µm
  • Pore Size Pre-filter
    3 µm
  • Prefilter Format
    Membrane Prefilters
  • Sterilization Method
    Autoclavable & In-Line Steam Sterilizable
  • Sterilization Procedures
    • In-Line Steam Sterilization: at 134 °C, 20 min., 0.5 bar
    • Autoclaving: at 134°C, 30 min, 2 bar
  • Support Fleece
    Polypropylene (PP)

 

  • Filter Format
    Cartridges
  • Filter Type
    Prefilters
  • Retention Rate
    N/A

 

  • Application
    • Vaccine Production
    • Blood and Plasma
  • Bacterial Endotoxins
    < 0.18 EU/mL as determined by the LAL test
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • GMP Compliance
    This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
  • Pack Size
    5