text.skipToContent text.skipToNavigation

Minisart® SRP15 Syringe Filter 17574----------K, 0.45 µm hydrophobic PTFE

Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17574 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.

Order Number:  17574----------K

Availability:  On Request

Non-sterile Minisart® SRP syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.

  • A pouch in one pack for less waste
  • Minimum extractables or leachables
  • Highest chemical compatibility
  • Suitable as venting filter

Brochure

Minisart® Syringe Filters — The Easy Choice – Clean and Safe (US and Canada)
en 6.4 MB
Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB
Minisart® Syringe Filters — The Easy Choice – Clean and Safe
en 6.4 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB
Laboratory Filtration Products
en 14.3 MB

Flyer

Minisart® Syringe Filters for HPLC Sample Preparation
en 583.1 kB
Шприцевые насадки Minisart® для пробоподготовки перед ВЭЖХ
ru 630.8 kB

User Manual

Minisart® Chemical Compatibility Guide
en 72.6 kB
HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure
en 364.1 kB
Minisart®-RC | SRP | NY | PES — Spritzenvorsatzfilter von Sartorius, verlässlich und hochrein
en 1.2 MB

Product properties

  • Colour
    White (opaque)
  • Filtration area
    1.7 cm²
  • Diameter
    15 mm
  • Flow rate
    150 mL/min with methanol at 1 bar (14.5 psi) | 1600 mL/min with air at 0.1 bar (1.5 psi)
  • Pore size
    0.45 µm
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Wettability
    Hydrophobic
  • High Flow
    No
  • Packaging
    Bulk pouch packed
  • Membrane material
    Polytetrafluorethylene (PTFE)
  • Connector Outlet
    Male Luer Slip
  • Connector Inlet
    Female Luer Lock
  • Sterility
    Non-Sterile

Technical attributes

  • Maximum Pressure
    4.5 bar
  • Operating Pressure
    4.5 bar (65 psi)
  • Hold-up volume
    30 – 100 µL before bubble point
  • Max. temperature
    121° C
  • Bubble point
    Min. value with ethanol 0.9 bar (13 psi)
  • Burst pressure
    Min. value 7.0 bar (102 psi)
  • Filter diameter
    15 mm
  • Housing dimensions
    25 × 23 mm
  • Device type
    Syringe Filters
  • Sample Type
    Solvents` Harsh liquids` Air/Gas
  • Sterilization Procedures
    Ethylene oxide` Autoclave, 121°C, 30 min
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    HPLC certified
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing material
    Polypropylene (PP)
  • Total throughput
    Up to 15 mL
  • Application
    HPLC
  • Area of application
    Analytical Sample Preparation` Clarification
  • pH Range
    1.0 – 14.0
  • Sterilization Method
    Ethylene oxide` Autoclave
  • Cytotoxicity
    According to ISO 10993-5

No accessories & consumables found