Sartopore® 2 Midicaps® 0.2µm Size 0 | 2pc.

  • Effective Filtration Area: 0.45 m² | 4.8 ft²
  • Pore Size: 0.45 µm prefilter | 0.2 µm final filter
  • Connectors: Inlet: Sanitary ¾“ | Outlet: Sanitary ¾“
  • Sterilization: Delivered sterile (Autoclaved)
  • Membrane Material: Polyethersulfone
  • Pack Size: 2 pieces

________________________________________

Connector explanation:

O = Hose Barb ½“ | S = Sanitary 1 ½“ | H = Hose Barb ¼“ | F = Sanitary ¾“

Size explanation:

Size 7 = 0.065 m² | Size 8 = 0.13 m² | Size 9 = 0.26 m² | Size 0 = 0.52 m²

Price (USD):
$888.00
Item No.: 
5445307H0--FF--V

*Custom/bulk order quotes are provided within 72 hours of request.

Sartopore ® 2 Membrane Filters Midicaps are self-contained, ready-to-use, sterile filter elements for sterile filtration in the pharmaceutical | pharmaceutical Biotech industry Due to its hydrophilic, heterogeneous, double-layer polyethersulfone membrane, Sartopore 2 capsules are designed for the sterile filtration of a diverse bandwidth of pharmaceutical products.

  • Single-use Midicaps® for process scale
  • Reduce cleaning and cleaning validation
  • Superior Flow Performance & Service Life
  • Most economical process solution
  • Broad chemical compatibility

Applications

Typical applications include the sterile filtration of: therapeutics - biological liquids - injection solutions - media - buffers - chemicals - cleaning and disinfecting agents.

Compatibility

The polyethersulfone membrane is compatible in a range of pH 1 to 14, making the Sartopore® 2 Midicaps® ideal for the filtration of solutions with low | high pH.

Easy handling

Sartopore® 2 Midicaps® are supplied as individually sterile-packaged, ready-to-use units, eliminating the need for pre-application sterilization.

Flexibility

Sartopore® 2 0.2 μm Midicaps® are supplied with different filtration areas of 500 cm² | 0.5 ft² to 0.45 m² | 5 ft² for easy adaptation to every filtration process regardless of batch size.

Scalability

Consistent and predictable scale-up and scale-down processes can be operational because all Sartopore® 2 Midicaps® are manufactured using the same membrane types and identical construction materials.

Cost savings

The use of single-use filter elements does not require investment in stainless steel filter housing. Eliminates additional costs for housing cleaning and cleaning validation.

Microbiological Retention

Sartopore® 2 Midicaps® 0.2 μm are fully validated sterile filter elements, in compliance with HIMA and ASTM F-838-05 guidelines.

Quality

Every single element is integrity checked to meet the highest quality standards.

Documentation

Sartopore® 2 Midicaps® are designed, developed and manufactured in accordance with iso 9001 certified quality management system. A Validation Manual is available in accordance with regulatory requirements.

Applications

  • Application
    High capacity platform for conventional sterile filtration  
  • Industry
    Pharma / Biotech  

Biological Information

  • Bacterial Retention
    Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology  

Compliance Information

  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test  
  • Biological Reactivity
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).  
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".  

Connections (Physical)

  • Connector Inlet
    3/4" Tri-Clamp 25 mm  
  • Connector Outlet
    3/4" Tri-Clamp 25 mm  
  • Connectors
    Sanitary 0.75" | Sanitary 0.75"  

Dimensions

  • Filter Size
    size 0 (0.45 m² / 4.8 ft²)  
  • Outer Diameter
    108.5 mm (77 mm without Connection / Valves)  

General Specifications

  • Capsule/Cartridge Format
    Midicaps®  
  • Maximum Allowable Back Pressure
    2 bar (29 psi) at 20°C; 1.5 bar (21.8 psi) at 50°C  
  • Maximum Diffusion
    at 20 °C and 2.5 bar | 36 psi: 0.05 m² | 0.5 ft²: 4 mL/min ; 0.1 m² | 1 ft²: 5 mL/min; 0.2 m²| 2 ft²: 7 mL/min; 0.45 m² | 4.5 ft²: 14 mL/min  
  • Minimum Required Bubble Point
    3.2 bar | 46 psi  
  • Vent Valve
    Standard  

Materials of Construction

  • Housing Material
    Polypropylene (PP)  
  • Material o-ring | seal
    Silicone (SI)  
  • Membrane Material
    Polyethersulfone (PES)  
  • Support Fleece
    Polypropylene (PP)  

Operating Conditions

  • Maximum Differential Pressure
    20 °C: 5 bar, 50 °C: 3 bar  
  • Maximum Operating Pressure
    5 bar (72.5 psi)  

Physicochemical Information

  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.  
  • Pore Size Final-filter
    0.2 µm  
  • Pore Size Pre-filter
    0.45 µm  

Product Information

  • Brand
    Sartopore® 2  
  • Pack Size
    2  
  • Type
    Size 0 | Connectors: FF  

Sterility/Purity

  • Delivery Condition
    Sterile - Autoclaved  
  • Sterilization Method
    Autoclavable  

Usage Protocols

  • Sterilization Procedures
    Autoclaving: at 134°C, 30 min, 2 bar, min. 25 Cycles  
  • Sartocheck® 5 Plus Filter Tester
    Item no.
    26787---FT---P

    The Sartocheck® 5 Plus Filter Tester is an automatic filter integrity tester with automated Quality Risk Management (QRM) designed to cover the complete range of integrity testing from small syringe filters up to large multi-round housings and tangential flow cassettes.

  • Sartoguard
    Item no.
    M_Sartoguard

    All members of the Sartoguard family utilize a highly asymmetric polyether sulfone (PES) membrane double layer for unmatched protection of final filters and bioburden reduction with an LRV of 6 per cm². In addition, combinations with different depth filter materials and gamma sterilizable versions are available.