opus® titration 20 ml, 100-240V
opus® titration 20 ml
Item no.: YDU-13
Availability (ex works): On Request
Dispenser for motor-powered dispensing directly from the reagent bottle.
- Electronic control and dispensing of volumes
- Titration impulse triggered by the motor enables the achievement of a droplet break-up from 10 μl for precision determination
- PIN function: adaptation of unit function range for users with different authorisations
- Media recirculating system for simple and rapid venting without reagent loss
- Free rotation
- TFT touchscreen with user-friendly menu
- Method memory for nine different titration procedures with storage of their complete settings
- RS232 interface for connection to Cubis MSA balances
- Integration in automated procedures possible
- Discharge valves and valve seats consisting of high-purity aluminium oxide ceramic
- Valve springs from Hastelloy
Please select from the following accessories to complete the titrator:
- opus accessory set I for quick change of the solvent reservoir
- opus accessories set II for use of the titrator screwed onto the solvent bottle
- 69Y03295 Serial RS232 cable for connecting the titrator to Cubis MSA balances
- YDO01MS-R Additional serial interface for parallel operation of printer and dispensing unit on Cubis MSA balances
- YAPP16 Dosing Application for controlling the titrator as part of automatic standard preparation
- YDU-20 SD card for storing data when using software application YAPP16
- YDU-9 Density measurement system for measuring the density of solvents
Application Note
Applications
-
UsageMotorised rinsing function, can be disconnected without tools, media-conveying components are suitable for steam sterilisation (121 °C)
Compliance Information
-
Quality Standardsin compliance with DIN EN ISO 8655
-
Test Certificates and ApprovalsDIN EN ISO 9001 compliant certification through unit protocol with serial number
Connections (Data)
-
Data Interface
-
USB
- RS232
-
USB
Dimensions
-
Dimensions320 mm × 80 mm × 63 mm
Features
-
Display3.5“ touch screen with 320 × 240 pixel, most important functions directly accessible from controller main screen
General Specifications
-
Additional Product Specifications
-
Accuracy: R = 0.2%, CV = 0.07%
-
Aeration: Automatic at the push of a button
-
Battery mode: Battery charge for an average of 2.5 to 3 h continuous operation. Battery capacity indicated on TFT display, charging time 6.5 h, intelligent electronics prevent overloading and deep discharging
-
Calibration: Calibration of other temperature or medium possible
-
Control panel: External control module incl. touch screen control
-
Remote control: Unit can be remotely controlled via an additional cable-connected device
- Velocity: in 10 stages from 0.1 ml/s to 4 ml/s
-
Accuracy: R = 0.2%, CV = 0.07%
Materials of Construction
-
Materials of ConstructionHousing made of PA6 reinforced glass fibre, all parts in contact with liquid are made of chemically inert material
Operating Conditions
-
Permissible Operating Temperature+4 °C – +40 °C
Power Requirements
-
Power RequirementsPlug-in mains unit 15V, 850 mA (optional via battery in control unit)
Volumes
-
Volume Range0.1 mL – 20 mL
Weights
-
Weight660 g
UV blocking light protection window for Hirschmann opus titration
The DMA™ 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user-friendliness. It employs the oscillating U-tube principle from Anton Paar. This means: 50 years of density measurement experience in one small instrument. The robust and lightweight design of DMA™ 35 enables on-site operation in a wide range of work environments. Two milliliters of sample are taken directly from the storage container and measured within seconds.