Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM60K2


  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services


Massemetrologie – Professionelles Equipment für absolute Präzision
de 19.2 MB
Métrologie de masse : Un équipement professionnel pour une précision absolue
fr 4.7 MB
zh 4.9 MB


Cubis® MCM60K2 — Manueller Massekomparator
de 328.9 kB
Cubis® — MCM60K2 Manual Mass Comparator
en 328.9 kB
Cubis® MCM60K2 — Comparateur de masse manuel
fr 334.7 kB


  • DAkkS Certificate


  • Readability
    10 mg
  • Repeatability (typical), s
    6 mg

Operating Conditions

  • Maximum Weighing Capacity
    64 kg

Product Information

  • Brand
    Cubis® MCM
Climate Module for Draft Shield I - Cubis® II


Climate module for draft shield I

Climate Module for Draft Shield A - CUBIS® I


Climate module for draft shield

Climate module tower for YCM20MC/YCM20MC


Tower for climate module YCM20MC

Below-balance weighing hook M6

display head with applicat.(n.t.b prog.)

Main Cord, 3-wires, India

Item no.

Main Cord,  Europe Special order only

Distribution PCB
Item no.

Cable (Display - Weighing cell)

Sealing frame
Item no.

Cover plate
Item no.

display pcb with applicat. (n.t.b prog.)

Display modul 320x240 AM-320240N

analog pcb E-box (needs to be progr.)

Main Cord, 3-wires, South-Africa

Display device holder
Item no.

Data interface, standard
Item no.

Display bottom plate
Item no.

Cable USB 3m
Item no.

connecting cable
Item no.

foot screws (4 pcs.)
Item no.

pressure plate (level indicator)

Contact plate
Item no.

TNG10, SMPS without 3-pin cordset

Digital pcb e-box (needs to be progr.)

Collapsible box, High Capacity

cap, round, 11,50mm, grey
Item no.

detent spring
Item no.

Connection PCB
Item no.

Main cord, 3-wires, Schweiz

Cord Set, 3-wires, Israel

Main cord, 3 wires, Brasil

Item no.

Main cord, 3-wires, Italy

Main cord, 3-wires, Denmark

Hood (E-Box)
Item no.

Main cord, 3-wires, USA, CDN

Set of small parts for MSA and MSU head

Main cord, 3-wires, Argentina

Cord Set, 3-wires, Australia/Newseeland

Item no.

Protecting cover Head (MSA/MSU)

Cord Set, 3-wires, China

Housing Foot, Stick On
Item no.

Power socket with filter pcb

Packaging cpl., High Capacity

Cord Set, 3-wires, United Kingdom

Main Cord, 3-wires, Japan
Item no.

Flat ribbon cable 12 pol.
Item no.

Spirit level with current output

Wiring pcb (E-box)
Item no.

level indicator
Item no.