Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM605

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM605 — Manual Mass Comparator
en 353.4 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    0.01 mg
  • Repeatability (typical), s
    10 µg

Operating Conditions

  • Maximum Weighing Capacity
    610 g
Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

Case
Item no.
69ME0019

Flat ribbon cable 12 pol.
Item no.
69MS0111

Pan
Item no.
69C00055

Hood (E-Box)
Item no.
69MS0106

Cable USB 3m
Item no.
69MS0099

Screw
Item no.
69ME0077

Guide (lower, left)
Item no.
69ME0024

Data interface, standard
Item no.
69MS0066

Bushing (2x), O-ring (4x)
Item no.
69ME0059

Connection PCB
Item no.
69MS0110

Connection cable load cell / e-box

Motor with gear (draft shield, top side)

Guide (lower, right)
Item no.
69ME0025

Set of caps
Item no.
69ME0008

sealing
Item no.
69MC5055

Glass plate
Item no.
69ME0074

Contact plate
Item no.
69C00078

Cover plate
Item no.
69MS0134

Motor with gear (draft shield,right side

Protecting cover Head (MSA/MSU)

Spirit level with current output

Guide for draft shield door, upper, left

Display bottom plate
Item no.
69MS0116

Lever spring
Item no.
69ME0082

Sealing set load cell
Item no.
69C00069

Glass Disk Over Level Bubble

Cable set
Item no.
69C00072

pressure plate (level indicator)

Set of cogwheeled guides (side doors)

Motor with gear (draft shield, left side

Sliding door,  left side
Item no.
69ME0013

Climate sensor (wiring board)

cap, round, 11,50mm, grey
Item no.
69MC5058

Foot screw
Item no.
69MS0022

Clamping piece
Item no.
69ME0075

Collapsible box
Item no.
69C09050

Collapsible box (small)
Item no.
69ME0950

Power socket with filter pcb

Cable, sensor / weighing switch

display pcb with applicat. (n.t.b prog.)

Sliding door, right side
Item no.
69ME0011

Shieldring
Item no.
69ME0002

Null indicator, cpl.
Item no.
69C00074

Cable (Display - Weighing cell)

Set of contact flexures
Item no.
69ME0023

Guide for draft shield door, upper, righ

Palm push button, left
Item no.
69MS0101

Wiring pcb (E-box)
Item no.
69C00065

Set of guide blocks (motorized side door

Packaging cpl.
Item no.
69C09000

Distribution PCB
Item no.
69MS0112

Holder
Item no.
69ME0076

Keyboard
Item no.
69MS0008

Hood for weighing cell
Item no.
69ME0069

Front panel (draft shield)

weighing chamber base plate

Housing Foot, Stick On
Item no.
6964246

System pcb. (needs to be programmed)

Coupling band
Item no.
69ME0080

Display modul 320x240 AM-320240N

display head with applicat.(n.t.b prog.)

Display device holder
Item no.
69MS0009

Top sliding door complete
Item no.
69ME0009

Palm push button, right
Item no.
69MS0102

Cap for data output
Item no.
69ED0147

Set of small parts for MSA and MSU head

Digital pcb e-box (needs to be progr.)

level indicator
Item no.
69B12133