Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM6.7

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM6.7 — Manual Mass Comparator
en 340.7 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    0.1 µg
  • Repeatability (typical), s
    0.15 µg

Operating Conditions

  • Maximum Weighing Capacity
    6.1 g
Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

Main cord, 3-wires, USA, CDN

Main Cord, 3-wires, Japan
Item no.
6900934S

pressure plate (level indicator)

Main Cord,  Europe Special order only

Cord Set, 3-wires, Australia/Newseeland

Main Cord, 3-wires, South-Africa

system pcb. (needs to be programmed)

detent spring
Item no.
69MS0073

wedge plate
Item no.
69MC5043

Ball
Item no.
69MC5062

hinge with stops
Item no.
69C00124

coupling band
Item no.
69S00014

Contact plate
Item no.
69C00078

Digital pcb e-box (needs to be progr.)

Keyboard
Item no.
69MS0008

cap, round, 11,50mm, grey
Item no.
69MC5058

Bearing shell
Item no.
69MC5024

lever
Item no.
69C00122

Spirit level with current output

Protecting cover Head (MSA/MSU)

Collapsible box (DA/DI/DU)

Packaging, complete (DF/DM)

Cable set
Item no.
69C00072

Cable (Display - Weighing cell)

Flat ribbon cable 12 pol.
Item no.
69MS0111

Palm push button, right
Item no.
69MS0102

Main cord, 3-wires, Denmark

Display device holder
Item no.
69MS0009

Display bottom plate
Item no.
69MS0116

Guide plate, upper
Item no.
69S00010

Connection PCB
Item no.
69MS0110

Main cord, 3 wires, Brasil

Wiring pcb (E-box)
Item no.
69C00065

Main cord, 3-wires, Italy

Holder
Item no.
69C00128

display head with applicat.(n.t.b prog.)

bushing
Item no.
69S00030

draft protection
Item no.
69C00121

TNG10, SMPS without 3-pin cordset

Cord Set, 3-wires, United Kingdom

display pcb with applicat. (n.t.b prog.)

Distribution PCB
Item no.
69MS0112

Retainer plate
Item no.
69MC5015

Housing Foot, Stick On
Item no.
6964246

Collapsible box (DF/DM)
Item no.
69MS0954

pressure ring
Item no.
69MC5030

Temperature sensor PT1000

Sub pan
Item no.
69MS0015

Palm push button, left
Item no.
69MS0101

O-ring
Item no.
69MC5019

drive
Item no.
69MC5021

Display modul 320x240 AM-320240N

Main cord, 3-wires, Argentina

nut
Item no.
69MC5026

sealing
Item no.
69MC5055

Connection cable load cell / e-box

Main Cord, 3-wires, India

Cap for data output
Item no.
69ED0147

Kit, complete
Item no.
69MC0013

frame with gasket
Item no.
69S00008

Set of small parts for MSA and MSU head

Cable USB 3m
Item no.
69MS0099

Power socket with filter pcb

Lift Device
Item no.
69MS0118

Decoder pcb
Item no.
69MS0142

Sensor cable
Item no.
69MS0141

wiring pcb
Item no.
69MS0196

Guide plate, lower
Item no.
69S00016

Cord Set, 3-wires, Israel

weighing pan
Item no.
69S00006

Glass Disk Over Level Bubble

Linkage
Item no.
69MC5031

Data interface, standard
Item no.
69MS0066

Bearing ring
Item no.
69MC5022

Hood (E-Box)
Item no.
69MS0106

Cord Set, 3-wires, China

lever
Item no.
69MC5029

Cover plate
Item no.
69MS0134

Main cord, 3-wires, Schweiz

Foot screw
Item no.
69MS0022

level indicator
Item no.
69B12133