Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM40K3

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM40K3 — Manual Mass Comparator
en 329.1 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    1 mg
  • Repeatability (typical), s
    2 mg

Operating Conditions

  • Maximum Weighing Capacity
    41 kg
Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

TNG10, SMPS without 3-pin cordset

Display modul 320x240 AM-320240N

Spirit level with current output

Main Cord, 3-wires, India

Protecting cover Head (MSA/MSU)

Contact plate
Item no.
69C00078

Display device holder
Item no.
69MS0009

Main Cord,  Europe Special order only

Data interface, standard
Item no.
69MS0066

Cable (Display - Weighing cell)

sealing
Item no.
69MC5055

Cable USB 3m
Item no.
69MS0099

Digital pcb e-box (needs to be progr.)

Main cord, 3-wires, Denmark

Cord Set, 3-wires, United Kingdom

display head with applicat.(n.t.b prog.)

Cover plate
Item no.
69MS0134

Main cord, 3 wires, Brasil

Power socket with filter pcb

Connection PCB
Item no.
69MS0110

buffer
Item no.
69LC0128

Main Cord, 3-wires, Japan
Item no.
6900934S

detent spring
Item no.
69MS0073

Cord Set, 3-wires, Australia/Newseeland

Main cord, 3-wires, Argentina

Flat ribbon cable 12 pol.
Item no.
69MS0111

Housing Foot, Stick On
Item no.
6964246

Display bottom plate
Item no.
69MS0116

Packaging cpl., High Capacity

Wiring pcb (E-box)
Item no.
69C00065

Cord Set, 3-wires, Israel

pressure plate (level indicator)

connecting cable
Item no.
69C00131

Main cord, 3-wires, Italy

display pcb with applicat. (n.t.b prog.)

cap, round, 11,50mm, grey
Item no.
69MC5058

Main cord, 3-wires, USA, CDN

Cord Set, 3-wires, China

Collapsible box, High Capacity

foot screws (4 pcs.)
Item no.
69MS0148

Sealing frame
Item no.
69FC0054

Main Cord, 3-wires, South-Africa

Hood (E-Box)
Item no.
69MS0106

Keyboard
Item no.
69MS0008

Distribution PCB
Item no.
69MS0112

Main cord, 3-wires, Schweiz

Set of small parts for MSA and MSU head

level indicator
Item no.
69B12133