Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM2004

Availability:  Discontinued

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM2004 — Manual Mass Comparator
en 341.7 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    0.1 µg
  • Repeatability (typical), s
    0.05 mg

Operating Conditions

  • Maximum Weighing Capacity
    2,500 g

Product Information

  • Brand
    Cubis® MCM
Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

Dust cover (DA/DI/DU)
Item no.
6960MS03

Display bottom plate
Item no.
69MS0116

Main cord, 3-wires, Argentina

Palm push button, right
Item no.
69MS0102

Display modul 320x240 AM-320240N

Set of small parts for MSA and MSU head

Cord Set, 3-wires, Australia/Newseeland

Glass Disk Over Level Bubble

Main Cord, 3-wires, South-Africa

Cover plate
Item no.
69MS0134

Housing Foot, Stick On
Item no.
6964246

Lateral glass left for draft shield

system pcb. (needs to be programmed)

Cord Set, 3-wires, China

Main Cord,  Europe Special order only

weighing pan
Item no.
69C00088

Sliding rail
Item no.
69MS0089

Main Cord, 3-wires, India

Lift Device
Item no.
69MS0026

Distribution PCB
Item no.
69MS0112

Data interface, standard
Item no.
69MS0066

sealing
Item no.
69MC5055

Main cord, 3-wires, Denmark

level indicator (1 o/oo)
Item no.
69RC0030

Flat ribbon cable 12 pol.
Item no.
69MS0111

Cord Set, 3-wires, Israel

collapsible box
Item no.
69C09051 Discontinued

Hood, complete
Item no.
69MS0093

display head with applicat.(n.t.b prog.)

Palm push button, left
Item no.
69MS0101

Lateral glass right for draft shield

pressure plate (level indicator)

Main Cord, 3-wires, Japan
Item no.
6900934S

Contact plate
Item no.
69C00078

detent spring
Item no.
69MS0073

cap, round, 11,50mm, grey
Item no.
69MC5058

Connection PCB
Item no.
69MS0110

Protecting cover Head (MSA/MSU)

Keyboard
Item no.
69MS0008

Weight 1200g
Item no.
69MS0031

Collapsible box (DA/DI/DU)

Sub pan
Item no.
69MS0015

Spirit level with current output

Wiring pcb (E-box)
Item no.
69C00065

Cap for data output
Item no.
69ED0147

packaging, complete
Item no.
69C09001

Connection cable load cell / e-box

Foot drive pair
Item no.
69MS0074

Front glass plate
Item no.
69MS0048

Electrical drive for door, right

Main cord, 3-wires, Italy

Main cord, 3-wires, USA, CDN

Stopper (Diameter 11mm, black)

Power socket with filter pcb

cooling assembly (draft shield)

display pcb with applicat. (n.t.b prog.)

cooling assembly
Item no.
69MS0274

Cork (2 pcs.)
Item no.
69MS0133

Hook M4
Item no.
69MS0045

Antstatic brush
Item no.
69MS0090

Cable (Display - Weighing cell)

Hood (E-Box)
Item no.
69MS0106

Electrical drive for door, left

Display device holder
Item no.
69MS0009

Main cord, 3 wires, Brasil

Cord Set, 3-wires, United Kingdom

Digital pcb e-box (needs to be progr.)

Electrical drive for cover glass plate

TNG10, SMPS without 3-pin cordset

Main cord, 3-wires, Schweiz

Cable USB 3m
Item no.
69MS0099

O-ring (2 pcs.)
Item no.
69MS0027

Stick foot set (2 pcs.)
Item no.
69MS0098

Cover glass plate for draft shield

level indicator
Item no.
69B12133