Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM1005

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM1005 — Manual Mass Comparator
en 347.1 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    0.01 mg
  • Repeatability (typical), s
    15 µg

Operating Conditions

  • Maximum Weighing Capacity
    1,110 g

Product Information

  • Brand
    Cubis® MCM
Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

Connection PCB
Item no.
69MS0110

Main cord, 3 wires, Brasil

Null indicator, cpl.
Item no.
69C00074

Motor with gear (draft shield,right side

Pan
Item no.
69C00055

Bushing (2x), O-ring (4x)
Item no.
69ME0059

Cord Set, 3-wires, Australia/Newseeland

Hood (E-Box)
Item no.
69MS0106

Foot screw
Item no.
69MS0022

Shieldring
Item no.
69ME0002

sealing
Item no.
69MC5055

Cord Set, 3-wires, Israel

TNG10, SMPS without 3-pin cordset

display pcb with applicat. (n.t.b prog.)

Connection cable load cell / e-box

pressure plate (level indicator)

Guide (lower, left)
Item no.
69ME0024

Main Cord, 3-wires, South-Africa

Housing Foot, Stick On
Item no.
6964246

Protecting cover Head (MSA/MSU)

Set of caps
Item no.
69ME0008

Screw
Item no.
69ME0077

cap, round, 11,50mm, grey
Item no.
69MC5058

Main cord, 3-wires, Italy

Set of contact flexures
Item no.
69ME0023

weighing chamber base plate

Collapsible box
Item no.
69C09050

Cable (Display - Weighing cell)

Guide for draft shield door, upper, righ

Main Cord,  Europe Special order only

Clamping piece
Item no.
69ME0075

Main cord, 3-wires, Denmark

Spirit level with current output

Packaging cpl.
Item no.
69C09000

Display modul 320x240 AM-320240N

Main Cord, 3-wires, India

Contact plate
Item no.
69C00078

Flat ribbon cable 12 pol.
Item no.
69MS0111

Palm push button, right
Item no.
69MS0102

detent spring
Item no.
69MS0073

Guide for draft shield door, upper, left

Holder
Item no.
69ME0076

Guide (lower, right)
Item no.
69ME0025

Set of small parts for MSA and MSU head

Sealing set load cell
Item no.
69C00069

Cable, sensor / weighing switch

Glass Disk Over Level Bubble

Main cord, 3-wires, Schweiz

Motor with gear (draft shield, top side)

Cord Set, 3-wires, United Kingdom

Power socket with filter pcb

Front panel (draft shield)

Sliding door, right side
Item no.
69ME0011

Top sliding door complete
Item no.
69ME0009

Distribution PCB
Item no.
69MS0112

Main Cord, 3-wires, Japan
Item no.
6900934S

Display device holder
Item no.
69MS0009

Digital pcb e-box (needs to be progr.)

Set of guide blocks (motorized side door

Glass plate
Item no.
69ME0074

Cover plate
Item no.
69MS0134

display head with applicat.(n.t.b prog.)

Palm push button, left
Item no.
69MS0101

Motor with gear (draft shield, left side

Climate sensor (wiring board)

Cable set
Item no.
69C00072

Data interface, standard
Item no.
69MS0066

System pcb. (needs to be programmed)

Display bottom plate
Item no.
69MS0116

Cable USB 3m
Item no.
69MS0099

Case
Item no.
69ME0019

Main cord, 3-wires, Argentina

Wiring pcb (E-box)
Item no.
69C00065

Collapsible box (small)
Item no.
69ME0950

Keyboard
Item no.
69MS0008

Sliding door,  left side
Item no.
69ME0013

Cord Set, 3-wires, China

Cap for data output
Item no.
69ED0147

Set of cogwheeled guides (side doors)

Main cord, 3-wires, USA, CDN

Hood for weighing cell
Item no.
69ME0069

level indicator
Item no.
69B12133