Skip to content Skip to navigation menu

Cubis® Manual Mass Comparator

Manual Cubis® MCM mass comparators combine metrological expertise and integrated OIML R 111-1 workflows. A choice of 14 models is available with maximum capacities of 6 g to 64 kg and readabilities of 0.1 μg to 10 mg. Models with a draft shield are supplied standard with a built-in climate module equipped with sensors for temperature, humidity and air pressure (external climate module for models without a draft shield). All results are displayed with their measurement uncertainties.

Item no.:  MCM1004

 

  • Complete mass standard laboratory in a single unit
  • Integrated climate sensors for recording all datarelevant for determining measurement uncertainty
  • Integrated workflow control for efficient anderror-free mass comparison
  • Fast measurement cycles according to the ABA, ABBA, AB1…BnA
  • Cubis® MSA color touch screen for fast and simple configuration of parameters and workflows
  • Sensor-equipped climate module integrated into the draft shield for recording the temperature, humidity and air pressure
  • Integrated calibration workflows for ABA, ABBA, AB1..BnA cycles to ensure efficient, error-free mass comparison- Fully integrated function for determining the measurement uncertainty in accordance with OIML and ASTM recommendations
  • Filters for optimal adaptation of the mass comparator to ambient conditions
  • Monolithic weighing technology
  • For display and evaluation, complete electronics and power supply separated from the weighing system to prevent heat from affecting the results
  • All MCM mass comparators featuring eccentric (off-center) load compensation for easy loading of weights without automatic centering
  • Additional applications for density determination, statistics and individual identifiers are integrated as standard programs
  • Built-in SD card slot for storage and transfer of all data and settings
  • Graphical level indicator for interactive user guidance during levelling
  • Easy logging of reference weight data
  • Continuous weighing range display: any weight between 0 g and the maximum capacity can be displayed
  • USB, RS-232C and Ethernet interface ports to integrate the mass comparator into networks or to enable it to communicate with external software via third-party protocols, standardized communication protocols or Web services

Datasheet

Cubis® MCM1004 — Manual Mass Comparator
en 347.1 kB

Certificates

  • DAkkS Certificate
    No

Features

  • Readability
    0.1 µg
  • Repeatability (typical), s
    15 µg

Operating Conditions

  • Maximum Weighing Capacity
    1,110 g
Climate Module for Draft Shield I - Cubis® II

$2,465.00

Climate module for draft shield I

Climate Module for Draft Shield A - CUBIS® I

$705.00

Climate module for draft shield

Climate module tower for YCM20MC/YCM20MC

$1,080.00

Tower for climate module YCM20MC

Below-balance weighing hook M6

Guide for draft shield door, upper, righ

Cable set
Item no.
69C00072

Power socket with filter pcb

Glass Disk Over Level Bubble

Front panel (draft shield)

Display modul 320x240 AM-320240N

Clamping piece
Item no.
69ME0075

Shieldring
Item no.
69ME0002

Set of contact flexures
Item no.
69ME0023

Cord Set, 3-wires, Israel

Main Cord,  Europe Special order only

Foot screw
Item no.
69MS0022

Set of small parts for MSA and MSU head

Set of guide blocks (motorized side door

Digital pcb e-box (needs to be progr.)

Hood for weighing cell
Item no.
69ME0069

Display bottom plate
Item no.
69MS0116

Display device holder
Item no.
69MS0009

detent spring
Item no.
69MS0073

Main Cord, 3-wires, Japan
Item no.
6900934S

Contact plate
Item no.
69C00078

Palm push button, right
Item no.
69MS0102

Motor with gear (draft shield, left side

System pcb. (needs to be programmed)

Cable, sensor / weighing switch

Data interface, standard
Item no.
69MS0066

Cord Set, 3-wires, United Kingdom

Climate sensor (wiring board)

display head with applicat.(n.t.b prog.)

weighing chamber base plate

Guide (lower, right)
Item no.
69ME0025

Set of cogwheeled guides (side doors)

pressure plate (level indicator)

Null indicator, cpl.
Item no.
69C00074

Distribution PCB
Item no.
69MS0112

Motor with gear (draft shield, top side)

Set of caps
Item no.
69ME0008

Glass plate
Item no.
69ME0074

Pan
Item no.
69C00055

Screw
Item no.
69ME0077

Main cord, 3-wires, Denmark

Main Cord, 3-wires, India

Sealing set load cell
Item no.
69C00069

Protecting cover Head (MSA/MSU)

Palm push button, left
Item no.
69MS0101

Main Cord, 3-wires, South-Africa

Main cord, 3 wires, Brasil

Main cord, 3-wires, Argentina

Wiring pcb (E-box)
Item no.
69C00065

Guide for draft shield door, upper, left

Cable USB 3m
Item no.
69MS0099

Main cord, 3-wires, Italy

Packaging cpl.
Item no.
69C09000

cap, round, 11,50mm, grey
Item no.
69MC5058

Sliding door,  left side
Item no.
69ME0013

Connection PCB
Item no.
69MS0110

Collapsible box (small)
Item no.
69ME0950

display pcb with applicat. (n.t.b prog.)

Cap for data output
Item no.
69ED0147

Bushing (2x), O-ring (4x)
Item no.
69ME0059

Collapsible box
Item no.
69C09050

Spirit level with current output

Main cord, 3-wires, Schweiz

Cord Set, 3-wires, Australia/Newseeland

Cord Set, 3-wires, China

Main cord, 3-wires, USA, CDN

Holder
Item no.
69ME0076

sealing
Item no.
69MC5055

Keyboard
Item no.
69MS0008

Cable (Display - Weighing cell)

Guide (lower, left)
Item no.
69ME0024

Hood (E-Box)
Item no.
69MS0106

Flat ribbon cable 12 pol.
Item no.
69MS0111

Motor with gear (draft shield,right side

Connection cable load cell / e-box

Case
Item no.
69ME0019

Sliding door, right side
Item no.
69ME0011

TNG10, SMPS without 3-pin cordset

Top sliding door complete
Item no.
69ME0009

Housing Foot, Stick On
Item no.
6964246

Cover plate
Item no.
69MS0134

level indicator
Item no.
69B12133