Skip to content Skip to navigation menu

Stainless steel pressure filter holder

Stainless Steel Holder with 200 ml capacity, for the filtration of up to 5 Liter volumes - for a lot of laboratory filtrations.

Item no.:  16249-----3

Price:  $2,518.50

Availability (ex works):  For more information please log in

Stainless Steel Holder with 200 ml capacity, for the filtration of up to 5 Liter volumes. A practical holder for a lot of laboratory filtrations. It can be attached to a tripod with the help of a steel rod which can be screwed in. The hose nipple is screwed into the side of the top part in order to leave room for a large filling opening. This simplifies the pouring-in of the sample and the sample can be refilled without removing the tube connection to the pressure source. Leak-proof sealing is achieved by hand-tightening of the closing ring. For the filtration of small volumes ( up to about 200 ml soil samples or viscous liquids, such as oils), the holder is connected directly to a pressure source. For the filtration of up to 5 liter volumes of relatively easily filterable liquids (e.g. buffer solutions, solutions for cell counters and tissue culture solutions), it is used in combination with a pressure tank.

Brochure

宣传手册:实验室过滤产品精简目录
zh 19.0 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

Applications

  • Area of Application
    • Sterile Filtration
    • Analytical Sample Preparation
    • Clarification
    • Particle Analysis

Connections (Physical)

  • Connector Inlet/Outlet
    M 12 x 1 female thread

Dimensions

  • Filter Diameter
    ⌀ 47 mm
  • Filtration Area
    13 cm²

Materials of Construction

  • Materials of Construction
    Stainless Steel (double wall thickness)

Operating Conditions

  • Maximum Operating Pressure
    10 bar (145 psi)

Product Information

  • Filter Holder Type
    Pressure Filter Holders
  • Pack Size
    1
  • Primary Product Type
    Filter Holders

Usage Protocols

  • Sterilization Procedures
    • By autoclaving (max. 134 °C)
    • Dry heat (max. 180 °C)
Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11301

$177.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11342

$179.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Hydrophobic PTFE Membrane Filters / Type 11803

$410.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11806

$410.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11807

$410.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11842

$410.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Polyethersulfone Membrane Filters / Type 15406

$180.00

Polyethersulfone membrane filters are hydrophilic, have high flow rates, a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Polyethersulfone Membrane Filters / Type 15407

$180.00

Polyethersulfone membrane filters are hydrophilic, have high flow rates, a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Polyethersulfone Membrane Filters / Type 15458

$180.00

Polyethersulfone membrane filters are hydrophilic, have high flow rates, a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.

Regenerated Cellulose Membrane Filters / Type 18406, 0.45 µm pore size, 47  mm diameter, 100 pieces per pack

$175.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Regenerated Cellulose Membrane Filters / Type 18407, 0.2 µm pore size, 47 mm diameter, 100 pieces per pack

$175.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Polycarbonate Track-Etched Membrane Filters / 0.4 µm / 47 mm Discs

$167.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.4 µm with a pore density of  1.50E+08 cm². Pack of 100 white 47 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 47 mm Discs

$165.00

 These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of  5.0E+08 cm². Pack of 100 white 47 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Polyamide Membrane Filters / Type 25006
Polyamide Membrane Filters / Type 25006
Item no.:   25006--47------N

$124.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Polyamide Membrane Filters / Type 25007
Polyamide Membrane Filters / Type 25007
Item no.:   25007--47------N

$136.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.