Skip to content Skip to navigation menu

Re-usable Polycarbonate Syringe Filter Holders, 25 mm

This polycarbonate filter holder has been designed for the use of 25 mm filters for the filtration of aqueous solutions.

Item no.:  16517----------E

Price:  $101.00

Availability:  For more information please log in

12 Pieces
   

This filter holder is made of clear, autoclavable polycarbonate. The silicone gasket enables a leak-free filtration at pressures up to 7 bar by simply screwing it together manually. Filter supports in the top and bottom parts allow filtration in both directions.

Brochure

Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB
宣传手册:实验室过滤产品精简目录
zh 19.0 MB

Catalog

Laboratory Filtration Products
en 8.2 MB

Compliance Information

  • Electrical / Battery item
    No

Dimensions

  • Filter Diameter
    ⌀ 25 mm
  • Filtration Area
    3 cm²
  • Suitable Membrane Filter Diameter
    25 mm

Operating Conditions

  • Maximum Operating Pressure
    7 bar | 700 kPa | 101.5 psi

eShop Dynamic Attributes

  • Application Area
    • Sterile Filtration
    • Analytical Sample Preparation
    • Clarification
    • Particle Analysis
  • Chemical Compatibility
    As for polycarbonate and silicone
  • Connectors
    Female Luer Lock inlet, luer slip outlet
  • Filter Holder Type
    Re-usable Syringe Filter Holders
  • Materials of Construction
    Polycarbonate (PC)
  • Pack Size
    12
  • Packaging
    Box, folding
  • Sterilization Procedures
    By autoclaving at 121 °C
  • Threads for Connectors
    Female Luer Lock inlet, luer slip outlet
Disposable plastic syringe, 5ml, 12/Pack
Disposable plastic syringe, 5ml, 12/Pack
Item no.: 16644----------E

$34.00

Benefit from Sartorius’ long-standing expertise in microbiological quality control, enhance performance and improve the safety of your processes. Obtain reproducible, reliable results for in-process and final release testing to meet the requirements of today and anticipate the demands of tomorrow.

Disposable plastic syringes, 20ml, 12/Pack

$62.00

Benefit from Sartorius’ long-standing expertise in microbiological quality control, enhance performance and improve the safety of your processes. Obtain reproducible, reliable results for in-process and final release testing to meet the requirements of today and anticipate the demands of tomorrow.

Disposable plastic syringes, 50ml, 12/Pack

$97.00

Benefit from Sartorius’ long-standing expertise in microbiological quality control, enhance performance and improve the safety of your processes. Obtain reproducible, reliable results for in-process and final release testing to meet the requirements of today and anticipate the demands of tomorrow.

Disposable plastic syringe, 10ml, 12/Pack

$43.00

Benefit from Sartorius’ long-standing expertise in microbiological quality control, enhance performance and improve the safety of your processes. Obtain reproducible, reliable results for in-process and final release testing to meet the requirements of today and anticipate the demands of tomorrow.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11342, 5.0 µm pore size, 25 mm diameter, 100 pieces per pack

$140.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11327, 0.2 µm pore size, 25 mm diameter, 100 pieces per pack

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Acetate Membrane Filters / Type 12342

$140.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Polyamide Membrane Filters / Type 25007
Polyamide Membrane Filters / Type 25007
Item no.: 25007--25------N

$156.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11302, 3.0 µm pore size,25 mm diameter, 100 pieces per pack

$111.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Acetate Membrane Filters / Type 11107

$83.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11303, 1.2 µm pore size, 25 mm diameter, 100 pieces per pack

$98.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Acetate Membrane Filters / Type 11105

$72.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Hydrophobic PTFE Membrane Filters / Type 11842

$330.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Polyamide Membrane Filters / Type 25006
Polyamide Membrane Filters / Type 25006
Item no.: 25006--25------N

$152.00

Polyamide membrane filters are hydrophilic and chemical resistant to alkaline solutions and organic solvents.

Polyethersulfone Membrane Filters - Type 154078- 0.1 µm pore size- 25 mm diameter- 100 pieces per pack

$127.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.<-p>

Cellulose Acetate Membrane Filters / Type 12303

$375.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Polyethersulfone Membrane Filters - Type 15407- 0.2 µm pore size- 25 mm diameter- 100 pieces per pack

$127.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.<-p>

Regenerated Cellulose Membrane Filters / Type 18406, 0.45 µm pore size, 25 mm diameter, 100 pieces per pack

$135.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 25 mm Discs

$114.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of  5.0E+08 cm². Pack of 100 white 25 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Regenerated Cellulose Membrane Filters / Type 18407, 0.2 µm pore size, 25 mm diameter, 100 pieces per pack

$135.00

The regenerated cellulose membrane filters are made of regenerated cellulose reinforced with a cellulose nonwoven.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11305,  0.65 µm pore size, 25 mm diameter, 100 pieces per pack

$111.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Polyethersulfone Membrane Filters - Type 15406- 0.45 µm pore size- 25 mm diameter- 100 pieces per pack

$191.00

Polyethersulfone membrane filters are hydrophilic- have high flow rates- a low non-specific protein adsorption and are chemically resistant over a pH range of 1 – 14.<-p>

Polycarbonate Track-Etched Membrane Filters / 0.4 µm / 25 mm Discs

$114.00

These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.4 µm with a pore density of  1.50E+08 cm². Pack of 100 white 25 mm discs that have a high chemical resistance and good thermal stability for accurate fractionation of particulates. Smooth, flat surface for good visibility.

Cellulose Acetate Membrane Filters / Type 11104

$225.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Hydrophobic PTFE Membrane Filters / Type 11806

$280.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Hydrophobic PTFE Membrane Filters / Type 11803

$330.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Cellulose Acetate Membrane Filters / Type 11106

$34.00

The hydrophilic cellulose acetate membrane filters combine high flow rates, good chemical resistance (pH 4-8) and thermal stability with very low adsorption characteristics. They are excellently suited for use in pressure filtration devices.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11301, 8.0 µm pore size, 25 mm diameter, 100 pieces per pack

$111.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Hydrophobic PTFE Membrane Filters / Type 11807

$280.00

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11304, 0.8 µm pore size,  25 mm diameter, 100 pieces per pack

$111.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

Cellulose Nitrate (Mixed Cellulose Ester) Membrane Filters / Type 11306, 0.45 µm pore size, 25 mm diameter, 100 pieces per pack

$111.00

The cellulose nitrate (CN) or also called mixed cellulose ester (MCE) membrane filters are composed of cellulose nitrate and a small content of cellulose acetate. They are recommended for a broad range of applications like the filtration of aqueous solutions or for sample preparation.

3-WAY SYRINGE VALVE WITH LUER LOCK

Benefit from Sartorius’ long-standing expertise in microbiological quality control, enhance performance and improve the safety of your processes. Obtain reproducible, reliable results for in-process and final release testing to meet the requirements of today and anticipate the demands of tomorrow.