Skip to content Skip to navigation menu

Minisart® SRP25 Syringe Filter 17575----------S, 0.2 µm hydrophobic PTFE

Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version S is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.

Item no.:  17575----------S

   

Non-sterile Minisart® SRP syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.

  • Bulk packs for less waste
  • Minimum extractables or leachables
  • Highest chemical compatibility
  • Suitable as venting filter

Brochure

Minisart® Syringe Filters — The Easy Choice – Clean and Safe (US and Canada)
en 13.0 MB
Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB
宣传手册:实验室过滤产品精简目录
zh 19.0 MB

Catalog

Laboratory Filtration Products
en 8.2 MB

Flyer

Minisart® Syringe Filters for HPLC Sample Preparation
en 479.9 kB
Шприцевые насадки Minisart® для пробоподготовки перед ВЭЖХ
ru 630.8 kB

User Manual

HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure
en 364.1 kB
Directions for Use - Minisart®-RC | SRP | NY | PES
en 1.6 MB
Minisart® Chemical Compatibility Guide
en 229.3 kB

Dimensions

  • Filter Diameter
    ⌀ 25 mm
  • Filtration Area
    4.8 cm²
  • Housing Dimensions
    33 × 24 mm

General Specifications

  • Filter Paper/Membrane Color
    White (opaque)
  • Flow Rate
    160 mL/min with methanol at 1 bar (14.5 psi) | 1800 mL/min with air at 0.1 bar (1.5 psi)
  • Total Throughput
    Up to 100 mL
  • pH Range
    1.0 – 14.0

Operating Conditions

  • Maximum Allowable Working Temperature
    121 °C (250 °F)
  • Maximum Operating Pressure
    4.5 bar (65 psi)
  • Operating Pressure
    4.5 bar (65 psi)

Volumes

  • Hold-up Volume
    100 – 200 µL before bubble point

eShop Dynamic Attributes

  • Application
    HPLC
  • Application Area
    • Sterile Filtration
    • Analytical Sample Preparation
    • Clarification
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Bubble Point
    Min. value with ethanol 1.1 bar (16 psi)
  • Burst Pressure
    Min. value 7.0 bar (102 psi)
  • Connector Inlet
    Female Luer Lock
  • Connector Outlet
    Male Luer Slip
  • Cytotoxicity
    According to ISO 10993-5
  • Delivery Condition
    Non-Sterile
  • Device Type
    Syringe Filters
  • Extractables
    HPLC certified
  • High Flow
    No
  • Housing Material
    Polypropylene (PP)
  • Membrane Material
    Polytetrafluorethylene (PTFE)
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Pack Size
    200
  • Packaging
    Bulk pouch packed
  • Pore Size
    0.2 µm
  • Sample Type
    • Solvents
    • Harsh liquids
    • Air/Gas
  • Sterilization Method
    • Ethylene oxide
    • Autoclave
  • Sterilization Procedures
    • Ethylene oxide
    • Autoclave, 121°C, 30 min
  • Wettability
    Hydrophobic

Customers Also Purchased

Minisart® SRP15 Syringe Filter 17573----------Q, 0.2 µm hydrophobic PTFE

Minisart® SRP15 Syringe Filter 17573----------Q, 0.2 µm hydrophobic PTFE

Learn More
Minisart® SRP25 Syringe Filter 17575----------Q, 0.2 µm hydrophobic PTFE

Minisart® SRP25 Syringe Filter 17575----------Q, 0.2 µm hydrophobic PTFE

Learn More
Minisart® SRP15 Syringe Filter 17558----------Q, 0.2 µm hydrophobic PTFE

Minisart® SRP15 Syringe Filter 17558----------Q, 0.2 µm hydrophobic PTFE

Learn More
Minisart® SRP25 syringe filters

Minisart® SRP25 syringe filters

Learn More