Skip to content Skip to navigation menu

Minisart® NML Plus Syringe Filter 17829----------Q, GF + 0.45 µm Surfactant-free Cellulose Acetate

Minisart® NML Plus with glass fibre prefilter and surfactant-free cellulose acetate (SFCA) is optimized for particle-laden aqueous solutions or oils for a higher total throughput. Type 17829 with a pore size of 0.45 µm can be used for clarification and has a male luer lock outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by gamma irradiation or EO.

Item no.:  17829----------Q

Availability:  On Request

   

Non-sterile Minisart® NML Plus syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows the removal of particles or cells from highly particle -laden liquids under non-sterile conditions. The glass fibre prefilter protects the membrane from early clogging and increases total throughput. The very low non-specific binding characteristics of the SFCA membrane makes the filters a perfect choice for biomolecule solutions. The housing is made of the acrylic resin MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. GF and membrane in one filter housing decrease the hold-up volume. If this is no limiting factor a GF-only version is available and can be coupled with a membrane-only syringe filter of choice.

  • Sterile and ready-to-use
  • GF-prefilter for higher total throughout
  • Very low non-specific binding
  • PVC-free
  • GF-only version available

Brochure

Minisart® Syringe Filters — The Easy Choice – Clean and Safe (US and Canada)
en 13.0 MB
Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB
宣传手册:实验室过滤产品精简目录
zh 19.0 MB
宣传手册:微生物质量控制产品精简目录
zh 1.7 MB

Catalog

Laboratory Filtration Products
en 8.2 MB

User Manual

Minisart® NML | HY | SRP — Sartorius Spritzenvorsatzfilter für die Filtration und Belüftung
en 1.4 MB
Minisart® Chemical Compatibility Guide
en 229.3 kB

 

  • Bubble Point
    Min. value with water 2.0 bar (44 psi)
  • Burst Pressure
    Min. value 7.0 bar (102 psi)
  • Connector Inlet
    Female Luer Lock
  • Connector Outlet
    Male Luer Lock
  • Delivery Condition
    Non-Sterile
  • Device Type
    Syringe Filters
  • Filtration Area
    6.2 cm²
  • Flow Rate
    160 mL/min with water at 1 bar (14.5 psi)
  • High Flow
    No
  • Hold-up Volume
    230 µL before bubble point
  • Housing Dimensions
    33 × 24 mm
  • Housing Material
    Acrylic-based multipolymer compound (MBS)
  • Material Prefilters
    Glass Fiber (GF)
  • Maximum Allowable Working Temperature
    60 °C (140 °F)
  • Maximum Operating Pressure
    4.5 bar (65 psi)
  • Membrane Material
    Surfactant-free Cellulose Acetate (SFCA)
  • Operating Pressure
    4.5 bar (65 psi)
  • Pore Size
    0.45 µm
  • Sample Type
    • Aqueous
    • Oils and alkanes according to chemical compatibility
  • Sterilization Method
    • Ethylene oxide
    • Gamma irradiation
  • Total Throughput
    Up to 200 mL
  • Wettability
    Hydrophilic
  • pH Range
    4.0 – 8.0

 

  • Application Area
    Clarification
  • Filter Diameter
    ⌀ 28 mm
  • Filter Paper/Membrane Color
    Yellow
  • Retention Rate
    0.7 µm²

 

  • Application
    • Buffer & Media
    • Cell Removal / Harvest
  • Cytotoxicity
    According to ISO 10993-5
  • Pack Size
    500
  • Packaging
    Bulk pouch packed

Customers Also Purchased

Minisart® NML Plus Syringe Filter 17824----------Q, 0.7 µm GF

Minisart® NML Plus Syringe Filter 17824----------Q, 0.7 µm GF

Learn More
Minisart® NML Plus Syringe Filter 17824----------K, 0.7 µm GF

Minisart® NML Plus Syringe Filter 17824----------K, 0.7 µm GF

Learn More