text.skipToContent text.skipToNavigation

Minisart® PES15 Syringe Filter 1776D----------Q, 0.2 µm Polyethersulfone

Minisart® PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0.22 µm can be used for sterile filtration and has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.

Item no.:  1776D----------Q

Availability:  On Request

Non-sterile Minisart® PES syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows clarification and cell removal under non-sterile conditions. In addition the non-sterile filters can be assembled and sterilised by the user. Due to the slightly asymmetric membrane structure, the PES surface almost behaves like a pre-filter and enables highest flow rates. The low binding membrane is tightly connected with the housing which allows bidirectional use. The housing is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.

  • Non-sterile filters for assembly
  • Slightly asymmetric PES with superior flow rate
  • Low non-specific binding
  • Bidirectional use possible
  • High chemical compatibility

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

User Manual

HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure
en 364.1 kB
Minisart®-RC | SRP | NY | PES — Spritzenvorsatzfilter von Sartorius, verlässlich und hochrein
en 1.2 MB
Minisart® Chemical Compatibility Guide
en 72.6 kB

Product properties

  • Color
    White (opaque)
  • Filtration area
    1.7 cm²
  • Quantity
    1
  • Flow rate
    40 mL/min with water at 1 bar (14.5 psi)
  • Pore size
    0.22 µm
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Wettability
    Hydrophilic
  • High Flow
    No
  • Packaging
    Bulk pouch packed
  • Membrane Material
    Polyethersulfone (PES)
  • Connector Outlet
    Male Luer Slip
  • Connector Inlet
    Female Luer Lock
  • Sterility
    Non-Sterile

Technical attributes

  • Operating Pressure
    4.5 bar (65 psi)
  • Hold-up volume
    30 – 100 µL before bubble point
  • Max. temperature
    121° C
  • Bubble point
    Min. value with water 3.2 bar (46 psi)
  • Burst pressure
    Min. value 7.0 bar (102 psi)
  • Filter diameter
    15 mm
  • Housing dimensions
    25 × 23 mm
  • Device Type
    Syringe Filters
  • Sample Type
    • Aqueous
    • Solvents and harsh liquids according to chemical compatibility
  • Sterilization Procedures
    • Ethylene oxide
    • Autoclave, 121°C, 30 min
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Polypropylene (PP)
  • Total Throughput
    Up to 15 mL
  • Application
    Buffer & Media
  • Area of Application
    • Sterile Filtration
    • Clarification
  • pH Range
    3.0 – 14.0
  • Sterilization Method
    • Ethylene oxide
    • Autoclave
  • Cytotoxicity
    According to ISO 10993-5