Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Ethylene Oxide, Female Luer Lock, Needle (38 × 1.7 mm), Pack Size 50
Minisart® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 16596HNK with a pore size of 0.2 µm can be used for sterile filtration. It has an outlet with needle. Version HNK is individually packed and sterilized by ethylene oxide (EO).
Item no.: 16596--------HNK
Price: $270.00
Choose your Minisart® with Acrylic-based MBS Housing
Individually packed and sterile Minisart® Air syringe filters are optimal for immediate usage whenever sterile filtration or venting is needed. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. Housing and membrane are tightly connected which allows bidirectional use.
- Sterile and ready-to-use
- Minimum extractables or leachables
- Very low non-specific binding
- Suitable as venting filter
Catalog
Datasheet
User Manual
Applications
-
ApplicationBuffer & Media
-
Application Area
-
Sterile Filtration
- Venting / Moisture Barrier
-
Sterile Filtration
Compliance Information
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
CytotoxicityAccording to ISO 10993-5
Connections (Physical)
-
Connector InletFemale Luer Lock
-
Connector OutletNeedle (38 × 1.7 mm)
Dimensions
-
Filter Diameter⌀ 15 mm
-
Filtration Area1.7 cm²
-
Housing Dimensions25 × 72 mm
Features
-
High FlowNo
General Specifications
-
Filter Paper/Membrane ColorYellow
-
Flow Rate2000 mL/min with air at 0.1 bar (1.5 psi)
-
Maximum Allowable Back Pressure0.3 bar (4.4 psi) at 20°C
-
Total Throughputup to 100 mL
-
pH Range3.0 – 12.0
Materials of Construction
-
Housing MaterialAcrylic-based multipolymer compound (MBS)
-
Membrane MaterialPolytetrafluorethylene (PTFE)
Operating Conditions
-
Maximum Allowable Working Temperature60 °C (140 °F)
-
Maximum Inlet Pressure3.0 bar (44 psi)
-
Maximum Operating Pressure4.5 bar (65 psi)
-
Operating Pressure4.5 bar (65 psi)
Physicochemical Information
-
Bubble PointMin. value with ethanol 0.9 bar (13 psi)
-
Burst PressureMin. value 7.0 bar (102 psi)
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Pore Size0.2 µm
-
WettabilityHydrophobic
Product Information
-
BrandMinisart® Air
-
Device TypeSyringe Filters
-
Pack Size50
-
PackagingSingle blister packed
-
Sample Type
-
Air/Gas
- Oils and alkanes according to chemical compatibility
-
Air/Gas
-
Sterilization MethodEthylene oxide
Sterility
-
Delivery ConditionEthylene Oxide
Volumes
-
Hold-up Volume230 µL before bubble point