s
Skip to content Skip to navigation menu

Minisart® SRP25 Syringe Filter 17575----------Q, 0.2 µm hydrophobic PTFE

Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.

Item no.:  17575----------Q

Availability:  On Request

Non-sterile Minisart® SRP syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.

  • Bulk packs for less waste
  • Minimum extractables or leachables
  • Highest chemical compatibility
  • Suitable as venting filter

Brochure

Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

Flyer

Minisart® Syringe Filters for HPLC Sample Preparation
en 583.1 kB
Шприцевые насадки Minisart® для пробоподготовки перед ВЭЖХ
ru 630.8 kB

User Manual

Minisart® Chemical Compatibility Guide
en 72.6 kB
HPLC-Certificate — Minisart® Syringe Filters for Sample Preparation – reliable and ultrapure
en 364.1 kB
Minisart®-RC | SRP | NY | PES — Spritzenvorsatzfilter von Sartorius, verlässlich und hochrein
en 1.2 MB

Product properties

  • Color
    White (opaque)
  • Sterility
    Non-Sterile
  • Wettability
    Hydrophobic
  • Packaging
    Bulk pouch packed
  • Pack Size
    500
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Connector Outlet
    Male Luer Slip
  • Connector Inlet
    Female Luer Lock
  • Membrane Material
    Polytetrafluorethylene (PTFE)
  • High Flow
    No
  • Filtration area
    4.8 cm²
  • Diameter
    25 mm
  • Flow rate
    160 mL/min with methanol at 1 bar (14.5 psi) | 1800 mL/min with air at 0.1 bar (1.5 psi)
  • Pore size
    0.2 µm

Technical attributes

  • Sterilization Method
    • Ethylene oxide
    • Autoclave
  • Application
    HPLC
  • Area of Application
    • Sterile Filtration
    • Analytical Sample Preparation
    • Clarification
  • Cytotoxicity
    According to ISO 10993-5
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    HPLC certified
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Polypropylene (PP)
  • Total Throughput
    Up to 100 mL
  • Device Type
    Syringe Filters
  • Sample Type
    • Solvents
    • Harsh liquids
    • Air/Gas
  • pH Range
    1.0 – 14.0
  • Maximum Pressure
    4.5 bar
  • Operating Pressure
    4.5 bar (65 psi)
  • Hold-up volume
    100 – 200 µL before bubble point
  • Max. temperature
    121° C
  • Bubble point
    Min. value with ethanol 1.4 bar (20 psi)
  • Burst pressure
    Min. value 7.0 bar (102 psi)
  • Filter diameter
    25 mm
  • Housing dimensions
    33 × 24 mm
  • Sterilization Procedures
    • Ethylene oxide
    • Autoclave, 121°C, 30 min