s
Skip to content Skip to navigation menu

Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Non-Sterile, Female Luer Lock , Male Luer Slip ,Pack Size 500

Minisart® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1751A with a pore size of 0.2 µm can be used for sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by EO .

Item no.:  1751A----------Q

Availability:  On Request

Non-sterile Minisart® Air syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows filtration or venting under non-sterile conditions. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. Housing and membrane are tightly connected which allows bidirectional use.

  • Bulk packs for less waste
  • PVC-free
  • Glueable, e.g. to tubing
  • Bidirectional use possible
  • Very low non-specific binding

Brochure

Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

User Manual

Minisart® Chemical Compatibility Guide
en 72.6 kB
Minisart® High Flow | NML | Air | HY | Acticosart — Sartorius Spritzenvorsatzfilter für die Filtration von Flüssigkeiten und zur Belüftung
en 1.2 MB

Product properties

  • Color
    Yellow
  • High Flow
    No
  • Sterility
    Non-Sterile
  • Packaging
    Bulk pouch packed
  • Filtration area
    1.7 cm²
  • Quantity
    500
  • Diameter
    15 mm
  • Flow rate
    2000 mL/min with air at 0.1 bar (1.5 psi)
  • Pore size
    0.2 µm
  • Wettability
    Hydrophobic
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Connector Outlet
    Male Luer Slip
  • Connector Inlet
    Female Luer Lock
  • Membrane Material
    Polytetrafluorethylene (PTFE)

Technical attributes

  • Sterilization Method
    • Ethylene oxide
    • Gamma irradiation
  • Cytotoxicity
    According to ISO 10993-5
  • Application
    Buffer & Media
  • Area of Application
    • Sterile Filtration
    • Venting / Moisture Barrier
  • Maximum Inlet Pressure
    3.0 bar (44 psi)
  • Maximum Pressure
    4.5 bar
  • Max. Allowable Back Pressure (at 20°C)
    0.3 bar (4.4 psi)
  • Operating Pressure
    4.5 bar (65 psi)
  • Hold-up volume
    100 µL before bubble point
  • Max. temperature
    60° C
  • Bubble point
    Min. value with ethanol 0.9 bar (13 psi)
  • Burst pressure
    Min. value 7.0 bar (102 psi)
  • Filter diameter
    15 mm
  • Housing dimensions
    25 × 23 mm
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Acrylic-based multipolymer compound (MBS)
  • pH Range
    3.0 – 12.0
  • Device Type
    Syringe Filters
  • Sample Type
    • Air/Gas
    • Oils and alkanes according to chemical compatibility