text.skipToContent text.skipToNavigation

Minisart® HY Venting Filter 1659A--------HYQ, 1 µm hydrophobic PTFE

Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier. It has a male luer lock outlet. Version HYQ is a non-sterile bulk pack. Units can be sterilized by EO .

Order Number:  1659A--------HYQ

Availability:  On Request

Non-sterile Minisart® HY syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows filtration or venting under non-sterile conditions. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. Housing and membrane are tightly connected which allows bidirectional use.

  • Bulk packs for less waste
  • PVC-free
  • Glueable, e.g. to tubing
  • Bidirectional use possible
  • Very low non-specific binding

Brochure

Шприцевые насадки Minisart® — Лёгкий выбор, высокая степень чистоты и надёжности
ru 2.7 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

User Manual

Minisart® High Flow | NML | Air | HY | Acticosart — Sartorius Spritzenvorsatzfilter für die Filtration von Flüssigkeiten und zur Belüftung
en 1.2 MB
Minisart® Chemical Compatibility Guide
en 72.6 kB

Product properties

  • Color
    Clear
  • Filtration area
    5.3 cm²
  • Diameter
    26 mm
  • Flow rate
    4000 mL/min with air at 0.1 bar (1.5 psi)
  • Pore size
    1.0 µm
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Wettability
    Hydrophobic
  • High Flow
    No
  • Packaging
    Bulk pouch packed
  • Sterility
    Non-Sterile
  • Membrane Material
    Polytetrafluorethylene (PTFE)
  • Connector Outlet
    Male Luer Lock
  • Connector Inlet
    Female Luer Lock

Technical attributes

  • Maximum Inlet Pressure
    4.0 bar (58 psi)
  • Maximum Pressure
    4.5 bar
  • Max. Allowable Back Pressure (at 20°C)
    4.0 bar (58 psi)
  • Operating Pressure
    4.5 bar (65 psi)
  • Hold-up volume
    100 – 150 µL before bubble point
  • Max. temperature
    60° C
  • Bubble point
    Min. value with ethanol 0.5 bar (7 psi)
  • Burst pressure
    Min. value 7.0 bar (102 psi)
  • Filter diameter
    26 mm
  • Housing dimensions
    33 × 24 mm
  • Device Type
    Syringe Filters
  • Sample Type
    Air/Gas` Oils and alkanes according to chemical compatibility
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Acrylic-based multipolymer compound (MBS)
  • Application
    Buffer & Media
  • Area of Application
    Venting / Moisture Barrier
  • pH Range
    3.0 – 12.0
  • Cytotoxicity
    According to ISO 10993-5
  • Sterilization Method
    Ethylene oxide