Cellulose nitrate membrane filters, white with black grid, presterilized in bags of 5
The system consists of the MD8 airscan® air sampler and disposable gelatine filter units. The system is routinely used for the quantitative detection of airborne organisms, mainly in sterile areas of class A and B (classification according to “EU-Guide for GMP“), isolators, or blow-fill-seal machines.
The very high air flow rate of 8 m³/h enables isokinetic sample removal at flow speed usual in laminar flow as well as for the filtration of 1 m³ air very quickly (less than 8 minutes). The filter unit can be placed remote from the air sampler.
The MD8 airscan® air sampler allows to adjust selectively and easily air flow rate and sample removal speed. By means of a specially developed calibration unit (see accessories) the user can calibrate the MD8 airscan® locally, e.g. within the scope of validation steps.
After removing the sample, the gelatine filter can be placed directly on the agar culture medium for incubation and colony growth.
- Accurate results / validatable retention
- Compliant with regulations such as EU-GMP
- Isokinetic sampling in laminar-flow areas (no generation of turbulence)
- Can be calibrated on-site
- Suitable for use in class A/B clean rooms, BFS machines and isolators, because the pump can be positioned outside the critical work area
- Lowest bacteria counts can be measured, due to the short sampling time of 1 m³ of air
Membrane filter for air- and particle monitoring with the MD8 Airscan
These membrane filters are applied, if gelatine membrane filters can not be used.
eg. at Ambient Temperature: >30°C and Humidity: > 80 %.
Pack size: 100 pc.
Material: Cellulosenitrate, white and black gridded
Pore size: 0.8 µm
Diameter: 80 mm
sterile packed in bags / 5 pc. each
Pore Size0.8 µm
Diameter⌀ 80 mm
Noise LevelFor gelatine membrane filters, max. 62 dB (A)
Correction of the Air Flow Rate SettingWhen the entered air flow rate cannot be attained, the display shows the max. attainable flow rate for a corresponding new setting below this value
Timer1-99 minutes, adjustable in 1 minute steps
Maximum Deviation+/- 5% in a temperature range of 15°-35° C
Flow Rate for Air at 1 bar0.03 - 0.13m³/min