5475307F7--SO--A
All members of the Sartoguard family utilize a highly asymmetric polyether sulfone (PES) membrane double layer for unmatched protection of final filters and bioburden reduction with an LRV of 6 per cm². In addition, combinations with different depth filter materials and gamma sterilizable versions are available.
Order Number: 5475307F7--SO--A
Availability: On Request
Configurate your Sartoguard®
Applications:
- Protection of downstream equipment and final membrane filters
- Bioburden reduction
Benefits:
- More economical process flow
- Downsizing of filtration systems
- Significantly higher total throughput performance
- LRV of 6 per cm² filtration area for Brevundimonas Diminuta and for Serratia Marcescens
Pure PES membrane
Sartoguard PES
For all, basic membrane prefiltration steps to protect your final membrane filter and downstream equipment. The single-use variants are also available as gamma sterilizable versions.
Power of glass fleece
Sartoguard GF
The Sartoguard GF filter elements combining the defined retention performance of membrane filters with high adsorptive power of glass fiber fleeces.
Unique PES Nanofleece
Sartoguard NF
The Sartoguard NF is the only gamma sterilizable membrane depth filter combination in single-use applications utilizing unique PES Nanofleece technology. The Nanofleece protects the membrane double layer from early blockage due to a high particle load.
For highest process flexibility all Sartoguard® filters are available as for conventional stainless steel or single use applications. All filter elements are available in various sizes and adapter combinations.
Datasheet
Product properties
-
Connector Outlet½" Single Stepped Hose Barb
-
Connector Inlet1 ½" Tri-Clamp 50 mm
-
Material o-ring | sealSilicone (SI)
-
Filtration area0.065 m²
-
Height120 mm
-
Pore size pre-filter1.2 µm
-
Pore size final-filter0.2 µm
-
Outer diameter108.5 mm (77 mm without Connection / Valves)
-
Filter FormatCapsules
-
Capsule/Cartridge FormatMidiCaps®
-
Filter Sizesize 7 (0.065 m² / 0.7 ft²)
Technical attributes
-
Sterilization MethodAutoclavable
-
GMP ComplianceThis product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
-
Maximum Differential Pressure5 bar
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Housing materialPolypropylene (PP)
-
Support FleecePolypropylene (PP)
-
IndustryPharma/Biotech
-
Min. required Bubble Point1.8 bar | 26 psi
-
Max. diffusion3 mL/min at 1.2 bar | 17.5 psi
-
Bubble point2.8 bar | 40.5 psi
-
Sterilization ProceduresAutoclaving=== at 134°C, 30 min, 2 bar
-
ApplicationmAB Production` Protection of Final Filters