text.skipToContent text.skipToNavigation

Sartopore® Platinum T-Style MaxiCaps®

Sartopore® Platinum is the latest polyethersulfone (PES) filter platform from Sartorius Stedim Biotech. The result of an innovative surface modification technology is a filter which is highly suitable for modern single-use applications, making the processes highly economic, user friendly and safe. Using Sartopore® Platinum you will benefit from cutting-edge membrane technology.

Order Number:  5498307H3G-OO

Availability:  On Request

Pore size: 0.45 | 0.2 µm (heterogeneous PES double layer)

Sartopore® Platinum, the best-wetting filter in the market, abolishes any potential wetting induced issues with integrity testing. And the perfect wettability of the new PES membrane leads to drastic reduction of the required flushing volume (up to 95% less water needed) which is highly beneficial for single-use processes. On top of it the new technology created a new membrane with the lowest protein adsorption of any PES membrane in the market by which your product yield can be maximized.
Moreover, the new pleating technology (TwinPleat) results in large-area capsules (1 m² filtration area per 10”) by which larger batch sizes can be filtered by a single device. This highly simplifies the handling of single-use assemblies.

Your Benefits:

  • Smaller filters, less filters - highest effective filter area (1 m²/10”)
  • Smaller dimensioning of assemblies – smaller bags, less tubing, hardware
  • No risk of wetting issues and re-testing
  • High filtration capacity by proven asymmetric PES membrane and perfect fit between pre- and final filter layer

For highest process flexibility all Sartopore® Platinum filters are available for conventional or single use applications. All filter elements are available in various sizes and adapter combinations. Please review the selection guide in the supporting resources literature.

Datasheet

Datasheet Sartopore® Platinum
en 597.7 kB

Product properties

  • Filtration area
    3 m²
  • Height
    866 mm
  • Max. operating pressure
    5 bar (72.5 psi)
  • Pore size pre-filter
    0.45 µm
  • Pore size final-filter
    0.2 µm
  • Outer diameter
    178 mm (110.4 mm without Connection / Valves)
  • Connector Outlet
    ½" Single Stepped Hose Barb
  • Connector Inlet
    ½" Single Stepped Hose Barb
  • Filter Type
    Liquid Filters
  • Capsule/Cartridge Format
    T-Style MaxiCaps®
  • Filter Size
    30" (3.0 m² / 32.3 ft²)
  • Material prefilters
    Polyethersulfone (PES), asymmetric
  • Material o-ring | seal
    Silicone (SI)
  • Vent Valve
    Standard

Technical attributes

  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test
  • Bacterial Retention
    Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
  • GMP Compliance
    This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
  • Maximum Differential Pressure
    20 °C=== 5 bar; 50 °C=== 3 bar
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing material
    Polypropylene (PP)
  • Support Fleece
    Polyester (PET)
  • Min. required Bubble Point
    3.5 bar
  • Max. Allowable Back Pressure (at 20°C)
    2 bar / 29 psi at 20°C; 1.5 bar / 21.8 psi at 50°C
  • Max. diffusion
    75 mL/min at 2.5 bar | 36 psi
  • Application
    Single Use Processing
  • Industry
    Pharma/Biotech
  • Sterilization Procedures
    Autoclaving=== at 134°C, 30 min, 2 bar, min. 5 Cycles` Gamma Irradiation=== with 50 kGy, 1 Cycle
  • Sterilization Method
    Autoclavable & Gamma Irradiatable