text.skipToContent text.skipToNavigation

Sartopure® IND Cartridge

The Sartopure® filter family is optimized for the clarification and retention by utilizing multiple layers of progressively finer pleated polypropylene or adsorptive glass fleece material. The turbidity reduction results in optimal protection of all downstream material like chromatographic columns or membrane filters.

Order Number:  5502102P1------G

Availability:  On Request

High Performance Polypropylene Prefilter
Sartopure® PP3
Applications:

  • Early clarification steps in vaccine production
  • Blood and Plasma fractionation

Benefits:
  • Highest total throughput
  • Superior protection abilities
  • Expanded retention rate 0.45µm – 100µm

Basic Polypropylene Prefilter
Sartopure® PP2
Applications:
  • Production supporting prefiltrations like Chemicals & WFI
  • Ophthalmics
Highly Adsorptive Glass Fleece Prefilter
Sartopure® GF Plus
Turbidity reduction in:
  • Cell harvest
  • mAB
  • Vaccine
  • Lipid and colloid containing fluids

Benefits:
  • Best turbidity reduction
  • Highly adsorptive

For highest process flexibility all Sartopure® filters are available for conventional or single use applications. All filter elements are available in various sizes and adapter combinations. Please review the selection guide in the supporting resources literature.

Brochure

Filterkerzen für den Bereich — Food & Beverage
de 2.3 MB

Datasheet

Sartopure® IND — Cartucce filtranti per la riduzione di particelle
it 493.8 kB
Sartopure® IND — Particle Reduction Filter Cartridges
en 473.7 kB

Product properties

  • Filter Type
    Filter Cartridges
  • Material prefilters
    Polypropylene (PP)
  • Type
    Prefilter
  • Membrane material
    Multiple polypropylene (PP) layers
  • Filtration area
    0.6 m²
  • Retention Rate
    3.0 µm
  • Length
    250 mm
  • Material o-ring | seal
    Silicone (SI)
  • Branch
    Food & Beverage
  • Adapter
    21 (Double open end with flat gasket)

Technical attributes

  • Sterilization Procedures
    In-Line Steam Sterilization=== min. 25 cycles at 134°C, 20 min. at max. differential pressure of 0.5 bar | 7 psi
  • GMP Compliance
    This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
  • Maximum Differential Pressure
    20 °C=== 5 bar; 80 °C=== 2 bar
  • Structural Compounds
    Polypropylene (PP)
  • Support Layers
    Polypropylene (PP)
  • Depth filter material
    Polypropylene (PP)

No accessories & consumables found