Sartopore® Platinum Gamma MidiCaps®
Sartopore® Platinum is the latest polyethersulfone (PES) filter platform from Sartorius Stedim Biotech. The result of an innovative surface modification technology is a filter which is highly suitable for modern single-use applications, making the processes highly economic, user friendly and safe. Using Sartopore® Platinum you will benefit from cutting-edge membrane technology.
Order Number: 5495307H7G-FH--A
Availability: On Request
Configurate your Filters for Liquids
Pore size: 0.45 | 0.2 µm (heterogeneous PES double layer)
Sartopore® Platinum, the best-wetting filter in the market, abolishes any potential wetting induced issues with integrity testing. And the perfect wettability of the new PES membrane leads to drastic reduction of the required flushing volume (up to 95% less water needed) which is highly beneficial for single-use processes. On top of it the new technology created a new membrane with the lowest protein adsorption of any PES membrane in the market by which your product yield can be maximized.
Moreover, the new pleating technology (TwinPleat) results in large-area capsules (1 m² filtration area per 10”) by which larger batch sizes can be filtered by a single device. This highly simplifies the handling of single-use assemblies.
Your Benefits:
- Smaller filters, less filters - highest effective filter area (1 m²/10”)
- Smaller dimensioning of assemblies – smaller bags, less tubing, hardware
- No risk of wetting issues and re-testing
- High filtration capacity by proven asymmetric PES membrane and perfect fit between pre- and final filter layer
For highest process flexibility all Sartopore® Platinum filters are available for conventional or single use applications. All filter elements are available in various sizes and adapter combinations. Please review the selection guide in the supporting resources literature.
Datasheet
Product properties
-
Filter TypeLiquid Filters
-
Capsule/Cartridge FormatMidiCaps®
-
Filter Sizesize 7 (0.065 m² / 0.7 ft²)
-
Material prefiltersPolyethersulfone (PES), asymmetric
-
Connector Outlet¼" Multiple Stepped Hose Barb
-
Connector Inlet¾" Tri-Clamp 25 mm
-
Filtration area0.065 m²
-
Height116 mm
-
Max. operating pressure5 bar (72.5 psi)
-
Pore size pre-filter0.45 µm
-
Pore size final-filter0.2 µm
-
Outer diameter108.5 mm (77 mm without Connection / Valves)
-
Material o-ring | sealSilicone (SI)
-
Vent ValveStandard
Technical attributes
-
Sterilization ProceduresGamma Irradiation=== with 50 kGy, 1 Cycle
-
IndustryPharma/Biotech
-
Sterilization MethodGamma Irradiatable
-
Bacterial Endotoxins< 0.25 EU/mL as determined by the LAL test
-
Bacterial RetentionQuantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
-
GMP ComplianceThis product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
-
Maximum Differential Pressure20 °C=== 5 bar; 50 °C=== 3 bar
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
ExtractablesThe total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Housing materialPolypropylene (PP)
-
Support FleecePolyester (PET)
-
Min. required Bubble Point3.5 bar
-
Max. Allowable Back Pressure (at 20°C)2 bar / 29 psi at 20°C; 1.5 bar / 21.8 psi at 50°C
-
Max. diffusion4 mL/min at 2.5 bar | 36 psi
-
ApplicationSingle Use Processing