Minisart® High Flow Syringe Filter 16537----------K, 0.45 µm Polyethersulfone
Minisart® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16537 with a pore size of 0.45 µm can be used for clarification and has a male luer lock outlet. Version K is individually packed and sterilized by ethylene oxide (EO).
Order Number: 16537----------K
Price: $141.00
Availability: In Stock *
*Detailed delivery date provided during check-out
Configurate your Minisart® Syringe Filter With Acrylic-Based MBS Housing
Individually packed and sterile Minisart® High Flow syringe filters are optimal for immediate usage whenever sterile filtration or clarification and cell removal under sterile conditions is needed. Due to the slightly asymmetric membrane structure, the PES surface almost behaves like a pre-filter and enables highest flow rates. The low binding membrane is tightly connected with the housing which allows bidirectional use. The housing is made of the acrylic resin MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test.
- Sterile and ready-to-use
- Slightly asymmetric PES with superior flow rate
- Low non-specific binding
- Bidirectional use possible
- PVC-free
Application Note
Brochure
Catalog
User Manual
Product properties
-
ColourDark Yellow
-
Filtration area6.2 cm²
-
Diameter28 mm
-
Flow rate220 mL/min with water at 1 bar (14.5 psi)
-
Pore size0.45 µm
-
Primary Product TypeFiltration Devices
-
BrandMinisart®
-
WettabilityHydrophilic
-
High FlowYes
-
PackagingSingle blister packed
-
Membrane materialPolyethersulfone (PES)
-
Connector OutletMale Luer Lock
-
Connector InletFemale Luer Lock
-
SterilityEthylene Oxide
Technical attributes
-
Maximum Pressure4.5 bar
-
Operating Pressure6 bar (87 psi)
-
Hold-up volume100 – 150 µL before bubble point
-
Max. temperature60° C
-
Bubble pointMin. value with water 2.0 bar (29 psi)
-
Burst pressureMin. value 7.0 bar (102 psi)
-
Filter diameter28 mm
-
Housing dimensions33 × 24 mm
-
Device typeSyringe Filters
-
Sample TypeAqueous` Solvents and harsh liquids according to chemical compatibility
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
ExtractablesHPLC certified
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Housing materialAcrylic-based multipolymer compound (MBS)
-
Total throughputUp to 200 mL
-
ApplicationBuffer & Media
-
Area of applicationClarification
-
pH Range3.0 – 12.0
-
Sterilization MethodEthylene oxide
-
CytotoxicityAccording to ISO 10993-5
No accessories & consumables found