Skip to content Skip to navigation menu

Sartopore® Platinum Cartridge

Sartopore® Platinum is the high performance polyethersulfone (PES) filter platform from Sartorius Stedim Biotech. The innovative surface modification of the membrane leads to excellent wettability. Therefore, this filter family is perfectly suited for modern single-use applications, making processes highly economic, user friendly and safe. Using Sartopore® Platinum you will benefit from this cutting-edge membrane technology.

Item no.:  5492507H3

Availability:  On Request

Pore Size: 0.45 | 0.2 µm (heterogeneous PES double layer)

Sartopore® Platinum family is the best-wetting filter platform on the market, eliminating any potential wetting induced issues during integrity testing. The perfect wettability of the modified PES double layer membrane leads to significant reduction of the required flushing volume (up to 95% less water needed), which is highly beneficial for single-use processes. Our Sartopore® Platinum family offers the lowest protein adsorption of any PES membrane on the market to maximize product yield. Moreover, our innovative pleating technology (TwinPleat) results in large-area capsules (1 m² filtration area per 10”) to filter large batch sizes with a single device.

Sartopore® Platinum HB is a specific filter type with a higher Bubble Point to ensure highest process safety. This filter is our recommended solution for challenging processes such as fill & finish applications.

Features & Benefits

  • Lowest protein adsorption – maximizing product yield
  • Excellent wettability – up to 95% less water needed
  • No wetting issues during integrity testing – preferred for single-use assemblies
  • Highest effective filter area (1 m²/10”) – less filter consumption

For highest process flexibility Sartopore® Platinum filters are offered for conventional and single-use applications. Our filter elements are available in multiple configurations regarding filtration area and adapter combinations. Please review the selection guide in the supporting literature.

Datasheet

Datasheet Sartopore® Platinum
en 913.9 kB

Product properties

  • Connector Outlet
    2-Flange Bayonet Adapter with 226 Double O-ring (25)
  • Connector Inlet
    2-Flange Bayonet Adapter with 226 Double O-ring (25)
  • Filter Type
    Liquid Filters
  • Capsule/Cartridge Format
    Cartridges
  • Filter Size
    30" (3.0 m² / 32.3 ft²)
  • Material Prefilters
    Polyethersulfone (PES), asymmetric
  • Filtration Area
    1 m²
  • Pore Size Final-filter
    0.2 µm
  • Pore Size Pre-filter
    0.45 µm
  • Material o-ring | seal
    Silicone (SI)
  • Vent Valve
    N/A
  • Height
    817 mm
  • Outer Diameter
    70 mm

Technical attributes

  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test
  • Bacterial Retention
    Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
  • GMP Compliance
    This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
  • Maximum Differential Pressure
    20 °C: 5 bar; 80 °C: 2 bar
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Polypropylene (PP)
  • Support Fleece
    Polypropylene (PP)
  • Maximum Diffusion
    75 mL/min at 2.5 bar | 36 psi
  • Minimum Required Bubble Point
    3.5 bar
  • Bubble Point
    ≥ 3.5 bar | 51 psi
  • Application
    Single Use Processing
  • Industry
    Pharma/Biotech
  • Sterilization Procedures
    • In-Line Steam Sterilization: at 134 °C, 20 min., 0.5 bar, min. 25 Cycles
    • Autoclaving: at 134°C, 30 min, 2 bar, min. 25 Cycles
  • Sterilization Method
    Autoclavable & In-Line Steam Sterilizable
  • Maximum Allowable Back Pressure (at 20°C)
    2 bar / 29 psi at 20°C; 1 bar / 14.5 psi at 80°C