Skip to content Skip to navigation menu

Sartobind® S 96-Well Plates, 10 units

Sartobind® S membrane adsorber units combine the advantages of convective media and ion exchange chromatography for rapid and easy contaminant removal or capture of virus and virus like particles.

Item no.:  99IEXS42GC-----D

Availability:  On Request

Sartobind® S membrane adsorbers display a macro-porous structure with pore size of > 3 µm. Sulfonic acid ligands are bound covalently to the complete internal surface of the membrane, resulting in separation media of high binding capacity combined with exceptional high flow rates.


The S membrane adsorber is successfully used in FDA-approved drug manufacture to remove host cell proteins at high flow rates. As a cation exchanger it displays not only aggregate removal capabilities but typically at least ten-fold higher binding capacity for viruses and virus-like-particles (VLP).


The Sartobind S adsorber speeds up the production process by high flow rate and opens new opportunities for the purification of therapeutic proteins and vaccines.

  • High speed host cell protein removal up to 30 bed volumes/ min
  • Aggregate removal

Easy to use:

  • Plug and play devices from 0.08 ml to 5 l
  • Can be used like a filter
  • Flow rate up to 30 bed volumes/min
  • Disposable or re-usable

Application Note

High Throughput Screening using Membrane Chromatography — Membrane based 96-well plate for process development in biomanufacturing
en 1.0 MB


Sartobind® Membrane Adsorbers — Chromatography as easy as filtration
en 3.7 MB


Sartobind® 96-well plates — High Throughput Screening with IEX and HIC Membrane Chromatography
en 843.2 kB


Sartobind® selection guide
en 1.0 MB

User Manual

Sartobind® 96-well plates — IEX (Q, S, STIC PA) and HIC (Phenyl) in 8-strips — For High Throughput Screening Based on Macroporous Membranes, 0.8 mm Bed Height
en 300.6 kB

Product properties

  • Connectors
  • Primary Product Type
  • Type
    Membrane adsorber (96-well plate)
  • Design
    Conventional filter design
  • Pack Size
  • Membrane Material
    Stabilised reinforced cellulose
  • Membrane
    Strong cation exchanger
  • Membrane Area
    0.7 cm²
  • Filter Format
    96-Well Plates
  • Pore Size Final-filter
    3 – 5 µm
  • Maximum Operating Pressure
    35 kPa
  • Bed Volume
    19 µL/well
  • Bed Height
    0.8 mm

Technical attributes

  • Ligand Density
    2 – 5 µeq/cm²
  • Chemical Compatibility
    Stable in common chromatography buffers, unstable to peroxide and other oxidizing or reactive reagents
  • Reference Protein
  • Application
  • What you receive
    • 10 plates
    • 1 operating instruction
  • Materials of Construction
  • Housing Material
    Polypropylene (PP)
  • Ligand
    Sulfonic acid
  • Material Holding Frame
  • Material 8-strip
    Polypropylene (PP)
  • pH Stability
    pH 3 – 14 (short term)
  • Maximum Pressure
    35 kPa
  • Reusable
  • Membrane Type
    Strong cation exchange membrane
  • Typical Dynamic Binding Capacity 10% per unit
    0.48 mg/well
  • Dimensions (W×D×H)
    128 × 85.5 × 25 mm