Skip to content Skip to navigation menu


Watertrap between filter flask and vacuum pump to prevent wetting of the devices.

Item no.:  17804----------M

Availability:  On Request

Watertrap between filter flask and vacuum pump to prevent wetting of the devices.


Vacusart — Reliable Retention of Bacteria, Particles and Water
en 70.1 kB

Product properties

  • Primary Product Type
  • Connector Inlet
    Multiple Stepped Hose Barb
  • Connector Outlet
    Multiple Stepped Hose Barb
  • Capsule/Cartridge Format
    Flat Disc Capsules
  • Filter Format
  • Filter Type
    Air/Gas/Solvent Filters
  • Filtration Area
    20 cm²
  • Pore Size Final-filter
    0.45 µm
  • Height
    690 mm
  • Maximum Operating Pressure
    3 bar
  • Membrane Filter Material
    Polytetrafluorethylene (PTFE)
  • Pack Size
  • Packaging
    Non-sterile, bulk packed

Technical attributes

  • Sterilization Method
  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test
  • Bacterial Retention
    Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology
  • GMP Compliance
    This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.
  • Maximum Differential Pressure
    3 bar
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
  • Gamma Stable
  • Housing Material
    Polypropylene (PP)
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Application
    Microbial Enumeration
  • Industry
  • Sterilization Procedures
    Autoclaving: max. 20 cycles at max. 134 °C, 2 bar | 29 psi
  • Minimum Required Bubble Point
    1.1 bar