Minisart® PES- Venting Filter 1757H----------Q, 0.2 µm hydrophobic PES
Minisart® PES with hydrophobic polyethersulfone (PES) is suitable for venting or filtration of gases and air. Type 1757H with a pore size of 0.2 µm can be used for sterile filtration and has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by gamma irradiation, autoclaving or EO.
Item no.: 1757H----------Q
Availability (ex works): On Request
Choose your Minisart® with PP Housing configuration
Non-sterile Minisart® PES- syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows venting under non-sterile conditions. In addition the non-sterile filters can be assembled and sterilised by the user. The hydrophobic PES membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of gamma-sterilisable PP (polypropylene) which is compatibility with harsh gases.
- Non-sterile bulk packs
- High chemical compatibility
- Suitable as venting filter
Brochure
Catalog
Applications
-
Area of Application
-
Sterile Filtration
- Venting / Moisture Barrier
-
Sterile Filtration
Compliance Information
-
BiosafetyAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
-
CytotoxicityAccording to ISO 10993-5
Connections Physical
-
Connector InletFemale Luer Lock
-
Connector OutletMale Luer Slip
Dimensions
-
Filter Diameter25 mm
-
Filtration Area4.8 cm²
-
Housing Dimensions33 × 23 mm
Features
-
High FlowNo
Materials of Construction
-
Housing MaterialPolypropylene (PP)
-
Membrane MaterialPolyethersulfone, Hydrophobic (PES)
Operating Conditions
-
Maximum Inlet Pressure4.0 bar (58 psi)
-
Maximum Temperature121° C
-
Operating Pressure4.5 bar (65 psi)
Physicochemical Information
-
Bubble PointMin. value with ethanol 0.95 bar (14 psi)
-
Burst PressureMin. value 7.0 bar (102 psi)
-
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
-
Pore Size0.2 µm
-
WettabilityHydrophobic
Product Information
-
BrandMinisart®
-
Device TypeSyringe Filters
-
Pack Size1
-
PackagingBulk pouch packed
-
Primary Product TypeFiltration Devices
-
Sample Type
-
Air/Gas
- Solvents according to chemical compatibility
-
Air/Gas
Specifications
-
Filter Paper/Membrane ColorWhite (opaque)
-
Flow Rate1200 mL/min with air at 0.1 bar (1.5 psi)
-
Maximum Allowable Back Pressure (at 20°C)1.0 bar (14.5 psi)
-
pH Range3.0 – 14.0
Sterility
-
SterilityNon-Sterile
Usage Protocols
-
Sterilization Method
-
Ethylene oxide
-
Gamma irradiation
- Autoclave
-
Ethylene oxide
-
Sterilization Procedures
-
Gamma irradiation
-
Ethylene oxide
- Autoclave, 121°C, 30 min
-
Gamma irradiation
Volumes
-
Hold-up Volume100 – 200 µL before bubble point