Skip to content Skip to navigation menu

Minisart® PES- Venting Filter 1757G----------Q, 0.2 µm hydrophobic PES

Minisart® PES with hydrophobic polyethersulfone (PES) is suitable for venting or filtration of gases and air. Type 1757G with a pore size of 0.2 µm can be used for sterile filtration and has a hose barb inlet and outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by gamma irradiation, autoclaving or EO.

Item no.:  1757G----------Q

Availability:  On Request

Non-sterile Minisart® PES- syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows venting under non-sterile conditions. In addition the non-sterile filters can be assembled and sterilised by the user. The hydrophobic PES membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of gamma-sterilisable PP (polypropylene) which is compatibility with harsh gases.

  • Non-sterile bulk packs
  • High chemical compatibility
  • Suitable as venting filter

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

Product properties

  • Color
    White (opaque)
  • Filtration area
    4.8 cm²
  • Flow rate
    1200 mL/min with air at 0.1 bar (1.5 psi)
  • Pore size
    0.2 µm
  • Primary Product Type
    Filtration Devices
  • Brand
    Minisart®
  • Wettability
    Hydrophobic
  • High Flow
    No
  • Packaging
    Bulk pouch packed
  • Pack Size
    1
  • Membrane Material
    Polyethersulfone, Hydrophobic (PES)
  • Connector Outlet
    Hose Barb 4–6 mm Stepped
  • Connector Inlet
    Hose Barb 4–6 mm Stepped
  • Sterility
    Non-Sterile

Technical attributes

  • Max. Allowable Back Pressure (at 20°C)
    1.0 bar (14.5 psi)
  • Operating Pressure
    4.5 bar (65 psi)
  • Bubble Point
    Min. value with ethanol 0.95 bar (14 psi)
  • Housing Dimensions
    33 × 36 mm
  • Device Type
    Syringe Filters
  • Sample Type
    • Air/Gas
    • Solvents according to chemical compatibility
  • Sterilization Procedures
    • Gamma irradiation
    • Ethylene oxide
    • Autoclave, 121°C, 30 min
  • Biosafety
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
  • Housing Material
    Polypropylene (PP)
  • Burst Pressure
    Min. value 7.0 bar (102 psi)
  • Filter Diameter
    25 mm
  • Area of Application
    • Sterile Filtration
    • Venting / Moisture Barrier
  • pH Range
    3.0 – 14.0
  • Maximum Inlet Pressure
    4.0 bar (58 psi)
  • Sterilization Method
    • Ethylene oxide
    • Gamma irradiation
    • Autoclave
  • Cytotoxicity
    According to ISO 10993-5
  • Maximum Temperature
    121° C
  • Hold-up Volume
    100 – 200 µL before bubble point