Skip to content Skip to navigation menu

Vivaflow 50R|200 complete set of accessories (230 V pump)

Complete set of accessories for the Vivaflow® 50R|200 with a 230 V pump

Comprises: Pump (230 V), Easy Load pump head (size 16), tubing, 500 ml sample| diafiltration reservoir, module stand, pressure indicator, T-connectors, series interconnectors

Item no.:  VFS202

Availability:  On Request

Vivaflow® 200 is a ready to use and reusable laboratory crossflow cassette for concentrating up to 5 l samples. The membrane surface per device is 200 cm². One unit comes with all necessary accessories for running the device with a laboratory pump and a size 16 pump head. For speeding up the concentration, two cassettes can be run simultaneously.

Vivaflow® 200 is optimally suited for applications like cell culture supernatant concentration, virus concentration and water concentration e.g. in fish breeding facilities. This economical product offers a standard of ease of use, reliability and flexibility unrivalled by any laboratory filtration system in the market. The thin-channel, flip-flow recirculation path of the modules provides high crossflow velocities with minimum pump speed requirements. A single 200 cm2 module typically concentrates 1 l by a factor of 50 in less than 30 min. Alternatively, two Vivaflow® 200 modules can be used in parallel for concentration of 5 l in under 75 minutes. Near total recovery of the concentrate is achieved with a single final rinse. Vivaflow® 200 can be easily cleaned and re-used several times. All accessories for sample concentration, except a peristaltic pump with a pump head for size 16 tubing, are included in the package for using a single cassette. A 500 ml sealed diafiltration reservoir can be added to the system for rapid and convenient buffer exchange.

Equipment required

The standard Vivaflow® 200 package comes with tubing, pressure indicator, flow restrictor and high pressure pump tubing. All you need is a peristaltic pump with a pump head capable of handling 6.4 mm OD tubing (size 16).

Equipment required

The standard Vivaflow® 200 package comes with tubing, pressure indicator, flow restrictor and high pressure pump tubing. All you need is a peristaltic pump with a pump head capable of handling 6.4 mm OD tubing (size 16).

Running 2 Vivaflow® 200 cassettes in parallel

For speeding up the concentration, two Vivaflow® 200 cassettes can easily be connected using a Y connector which is preassembeled with the correct tubing sizes and fittings (size 16 tubing for connecting the two Vivaflow® 200 units, size 15 tubing for the pump). Please note that you need a size 15 pump head for running 2 Vivaflows® in parallel.

  • High flow rate and recovery
  • Clear housing for process monitoring
  • Ready to use single cassettes
  • Easy set up of 2 cassettes for use in parallel
  • Re-usable product

Performance Characteristics

  Time to concentrate up to 20x (min.) at 3 bar
inlet pressure, 20°C
     
  Start volume Average flux Recovery %  
  1 litre ml/min Direct 25 ml rinse
Lysozyme 0.25 mg/ml (14,000 MW)        
2,000 MWCO Hydrosart 160 6 97 % > 99 %
3,000 MWCO PES 180 5 97 % > 99 %
BSA 1.0 mg/ml (66,000 MW)        
5,000 MWCO PES 29 33 98 % > 99 %
5,000 MWCO Hydrosart 70 14 98 % > 99 %
10,000 MWCO PES 23 41 96 % > 99 %
10,000 MWCO Hydrosart 35 27 98 % > 99 %
30,000 MWCO PES 25 38 96 % 99 %
30,000 MWCO Hydrosart 20 48 96 % > 99 %
50,000 MWCO PES 22 43 96 % 98 %
γ Globulins 1.0 mg/ml (average 160,000 MW)        
100,000 MWCO PES 54 18 96 % 99 %
100,000 MWCO RC 45 21 96 % 99 %
Yeast 1.0 mg/ml (S. Cerevisiae)        
0.2 μm PES 11 86 92 % 98 %
Dilute solute concentration, start volume
1 litre at 3 bar, 10,000 MWCO PES
       
BSA 0.001 mg/ml 18 52 90 % 98 %
BSA 0.01 mg/ml 20 47 92 % 98 %
BSA 0.1 mg/ml 21 45 94 % 99 %
Start volume 5 litres (two VF200 in
parallel at 3 bar) 10,000 MWCO PES
       
BSA 1.0 mg/ml (66,000 MW) 67 70 97 % > 99 %

Application Note

Vivaflow® and Vivaspin® Workflow in Protein Research Laboratories
en 827.9 kB
The Measurement of Soluble (< 10 kDa) Trace Metals in seawater by the Vivaflow 50
en 269.6 kB

Brochure

Ultrafiltration Family
en 1.6 MB

Catalog

Laboratory Filtration Products (US and Canada)
en 9.6 MB

Datasheet

Vivaflow® 50 | 50R | 200 — Unique, “Plug & Play” Laboratory Crossflow Devices
en 677.1 kB

User Manual

Vivaflow 50|200
fr 543.1 kB
Vivaflow 50 | 50R | 200
en 731.4 kB

Product properties

  • Primary Product Type
    Pumps
  • Line Voltage
    230 V
  • Material o-ring | seal
    Silicone (SI)
  • Tubing
    PVC (medical grade)
  • Maximum Operating Pressure
    4 bar
  • Volume Range
    500 – 5,000 mL

Technical attributes

  • Fittings
    Nylon (NY)
  • Flow Channel
    Acrylic
  • Flow Restrictor
    Polypropylene (PP)
  • Pressure Indicator
    Polypropylene, SS spring
  • Active Membrane Area
    200 cm²
  • Maximum Pressure
    4 bar
  • Overall Height
    138 mm
  • Overall Length
    126 mm
  • Membrane Support
    Polypropylene (PP)
  • Channel Height
    0.4 mm
  • Channel Width
    10 mm
  • Maximum Temperature
    60° C
  • Minimum Recirculation Volume
    < 20 mL
  • Non-recoverable Hold-up
    < 2 mL
  • Pump Flow
    200 – 400 mL/min

Customers Also Purchased

Sartolab® RF Vacuum Filtration Units 180C3----------E, 0.22 µm Polyethersulfone, 1000 ml

Sartolab® RF Vacuum Filtration Units 180C3----------E, 0.22 µm Polyethersulfone, 1000 ml

Learn More
Vivaflow 50, 3,000 MWCO PES, 2pc

Vivaflow 50, 3,000 MWCO PES, 2pc

Learn More
500 ml Sample|Diafiltration Reservoir

500 ml Sample|Diafiltration Reservoir

Learn More
Masterflex Easy Load Pump Head - Size 16

Masterflex Easy Load Pump Head - Size 16

Learn More
Masterflex Easy Load Pump Head - Size 15

Masterflex Easy Load Pump Head - Size 15

Learn More
Vivaspin Turbo 15, 3,000 MWCO PES, 12pc

Vivaspin Turbo 15, 3,000 MWCO PES, 12pc

Learn More
Vivaspin 20, 3,000 MWCO PES, 12pc

Vivaspin 20, 3,000 MWCO PES, 12pc

Learn More